FAQ Page

Contents

Invitation links and getting started

When your stack is published to the showcase then viewers will see its summary view and be able to click on its title to open and explore its content.

Screenshot showing the stack summary view

You add the information that is used to create the Stack Summary view in the Stack Summary area in the editor. Adding more information helps your stack stand out in the showcase and also helps it to be found when people search the showcase.

To add this information to your ePoster stack, edit your stack and then:

1. Click on the Stack Summary tab

Screenshot showing the location of the Stack Summary tab
The Stack Summary tab

2. Fill in (or check) the information requested in this area (Stack title, Authors, Author affiliations, Stack summary, Stack summary image and Tags).

You usually do not need to fill in the Extra Information boxes at the bottom of the Stack Summary area unless your conference is onsite (rather than virtual). This extra information is only used on the printable summary posters. Summary posters tend to be used by onsite conferences. They are printed and displayed at the venue to give delegates easy onsite access to the stacks.

3. Save your stack

Screenshot showing location of Stack Summary fields and the Save Stack button

4. Close the editor

Screenshot showing location of the Close Editor button

5. You will now see the updated summary view of your stack containing the information you have added. The full list of authors will not appear in the stack summary view, but delegates will see it if they hover over the main author name in the summary view.

Screenshot showing location of the stack summary

If you want to make further changes to the stack summary then you can edit the stack again, update the information in the Stack Summary area and save your stack. The stack summary will again be updated.

Creating and returning to edit your stack

When your stack is published to the showcase then viewers will see its summary view and be able to click on its title to open and explore its content.

Screenshot showing the stack summary view

You add the information that is used to create the Stack Summary view in the Stack Summary area in the editor. Adding more information helps your stack stand out in the showcase and also helps it to be found when people search the showcase.

To add this information to your ePoster stack, edit your stack and then:

1. Click on the Stack Summary tab

Screenshot showing the location of the Stack Summary tab
The Stack Summary tab

2. Fill in (or check) the information requested in this area (Stack title, Authors, Author affiliations, Stack summary, Stack summary image and Tags).

You usually do not need to fill in the Extra Information boxes at the bottom of the Stack Summary area unless your conference is onsite (rather than virtual). This extra information is only used on the printable summary posters. Summary posters tend to be used by onsite conferences. They are printed and displayed at the venue to give delegates easy onsite access to the stacks.

3. Save your stack

Screenshot showing location of Stack Summary fields and the Save Stack button

4. Close the editor

Screenshot showing location of the Close Editor button

5. You will now see the updated summary view of your stack containing the information you have added. The full list of authors will not appear in the stack summary view, but delegates will see it if they hover over the main author name in the summary view.

Screenshot showing location of the stack summary

If you want to make further changes to the stack summary then you can edit the stack again, update the information in the Stack Summary area and save your stack. The stack summary will again be updated.

Adding content to your stack using the Tile Library

When your stack is published to the showcase then viewers will see its summary view and be able to click on its title to open and explore its content.

Screenshot showing the stack summary view

You add the information that is used to create the Stack Summary view in the Stack Summary area in the editor. Adding more information helps your stack stand out in the showcase and also helps it to be found when people search the showcase.

To add this information to your ePoster stack, edit your stack and then:

1. Click on the Stack Summary tab

Screenshot showing the location of the Stack Summary tab
The Stack Summary tab

2. Fill in (or check) the information requested in this area (Stack title, Authors, Author affiliations, Stack summary, Stack summary image and Tags).

You usually do not need to fill in the Extra Information boxes at the bottom of the Stack Summary area unless your conference is onsite (rather than virtual). This extra information is only used on the printable summary posters. Summary posters tend to be used by onsite conferences. They are printed and displayed at the venue to give delegates easy onsite access to the stacks.

3. Save your stack

Screenshot showing location of Stack Summary fields and the Save Stack button

4. Close the editor

Screenshot showing location of the Close Editor button

5. You will now see the updated summary view of your stack containing the information you have added. The full list of authors will not appear in the stack summary view, but delegates will see it if they hover over the main author name in the summary view.

Screenshot showing location of the stack summary

If you want to make further changes to the stack summary then you can edit the stack again, update the information in the Stack Summary area and save your stack. The stack summary will again be updated.

Commonly used Tiles

When your stack is published to the showcase then viewers will see its summary view and be able to click on its title to open and explore its content.

Screenshot showing the stack summary view

You add the information that is used to create the Stack Summary view in the Stack Summary area in the editor. Adding more information helps your stack stand out in the showcase and also helps it to be found when people search the showcase.

To add this information to your ePoster stack, edit your stack and then:

1. Click on the Stack Summary tab

Screenshot showing the location of the Stack Summary tab
The Stack Summary tab

2. Fill in (or check) the information requested in this area (Stack title, Authors, Author affiliations, Stack summary, Stack summary image and Tags).

You usually do not need to fill in the Extra Information boxes at the bottom of the Stack Summary area unless your conference is onsite (rather than virtual). This extra information is only used on the printable summary posters. Summary posters tend to be used by onsite conferences. They are printed and displayed at the venue to give delegates easy onsite access to the stacks.

3. Save your stack

Screenshot showing location of Stack Summary fields and the Save Stack button

4. Close the editor

Screenshot showing location of the Close Editor button

5. You will now see the updated summary view of your stack containing the information you have added. The full list of authors will not appear in the stack summary view, but delegates will see it if they hover over the main author name in the summary view.

Screenshot showing location of the stack summary

If you want to make further changes to the stack summary then you can edit the stack again, update the information in the Stack Summary area and save your stack. The stack summary will again be updated.

Advanced Tiles

When your stack is published to the showcase then viewers will see its summary view and be able to click on its title to open and explore its content.

Screenshot showing the stack summary view

You add the information that is used to create the Stack Summary view in the Stack Summary area in the editor. Adding more information helps your stack stand out in the showcase and also helps it to be found when people search the showcase.

To add this information to your ePoster stack, edit your stack and then:

1. Click on the Stack Summary tab

Screenshot showing the location of the Stack Summary tab
The Stack Summary tab

2. Fill in (or check) the information requested in this area (Stack title, Authors, Author affiliations, Stack summary, Stack summary image and Tags).

You usually do not need to fill in the Extra Information boxes at the bottom of the Stack Summary area unless your conference is onsite (rather than virtual). This extra information is only used on the printable summary posters. Summary posters tend to be used by onsite conferences. They are printed and displayed at the venue to give delegates easy onsite access to the stacks.

3. Save your stack

Screenshot showing location of Stack Summary fields and the Save Stack button

4. Close the editor

Screenshot showing location of the Close Editor button

5. You will now see the updated summary view of your stack containing the information you have added. The full list of authors will not appear in the stack summary view, but delegates will see it if they hover over the main author name in the summary view.

Screenshot showing location of the stack summary

If you want to make further changes to the stack summary then you can edit the stack again, update the information in the Stack Summary area and save your stack. The stack summary will again be updated.

Co-authors

When your stack is published to the showcase then viewers will see its summary view and be able to click on its title to open and explore its content.

Screenshot showing the stack summary view

You add the information that is used to create the Stack Summary view in the Stack Summary area in the editor. Adding more information helps your stack stand out in the showcase and also helps it to be found when people search the showcase.

To add this information to your ePoster stack, edit your stack and then:

1. Click on the Stack Summary tab

Screenshot showing the location of the Stack Summary tab
The Stack Summary tab

2. Fill in (or check) the information requested in this area (Stack title, Authors, Author affiliations, Stack summary, Stack summary image and Tags).

You usually do not need to fill in the Extra Information boxes at the bottom of the Stack Summary area unless your conference is onsite (rather than virtual). This extra information is only used on the printable summary posters. Summary posters tend to be used by onsite conferences. They are printed and displayed at the venue to give delegates easy onsite access to the stacks.

3. Save your stack

Screenshot showing location of Stack Summary fields and the Save Stack button

4. Close the editor

Screenshot showing location of the Close Editor button

5. You will now see the updated summary view of your stack containing the information you have added. The full list of authors will not appear in the stack summary view, but delegates will see it if they hover over the main author name in the summary view.

Screenshot showing location of the stack summary

If you want to make further changes to the stack summary then you can edit the stack again, update the information in the Stack Summary area and save your stack. The stack summary will again be updated.

Editing Tiles

When your stack is published to the showcase then viewers will see its summary view and be able to click on its title to open and explore its content.

Screenshot showing the stack summary view

You add the information that is used to create the Stack Summary view in the Stack Summary area in the editor. Adding more information helps your stack stand out in the showcase and also helps it to be found when people search the showcase.

To add this information to your ePoster stack, edit your stack and then:

1. Click on the Stack Summary tab

Screenshot showing the location of the Stack Summary tab
The Stack Summary tab

2. Fill in (or check) the information requested in this area (Stack title, Authors, Author affiliations, Stack summary, Stack summary image and Tags).

You usually do not need to fill in the Extra Information boxes at the bottom of the Stack Summary area unless your conference is onsite (rather than virtual). This extra information is only used on the printable summary posters. Summary posters tend to be used by onsite conferences. They are printed and displayed at the venue to give delegates easy onsite access to the stacks.

3. Save your stack

Screenshot showing location of Stack Summary fields and the Save Stack button

4. Close the editor

Screenshot showing location of the Close Editor button

5. You will now see the updated summary view of your stack containing the information you have added. The full list of authors will not appear in the stack summary view, but delegates will see it if they hover over the main author name in the summary view.

Screenshot showing location of the stack summary

If you want to make further changes to the stack summary then you can edit the stack again, update the information in the Stack Summary area and save your stack. The stack summary will again be updated.

Changing the layout and appearance of a tile

When your stack is published to the showcase then viewers will see its summary view and be able to click on its title to open and explore its content.

Screenshot showing the stack summary view

You add the information that is used to create the Stack Summary view in the Stack Summary area in the editor. Adding more information helps your stack stand out in the showcase and also helps it to be found when people search the showcase.

To add this information to your ePoster stack, edit your stack and then:

1. Click on the Stack Summary tab

Screenshot showing the location of the Stack Summary tab
The Stack Summary tab

2. Fill in (or check) the information requested in this area (Stack title, Authors, Author affiliations, Stack summary, Stack summary image and Tags).

You usually do not need to fill in the Extra Information boxes at the bottom of the Stack Summary area unless your conference is onsite (rather than virtual). This extra information is only used on the printable summary posters. Summary posters tend to be used by onsite conferences. They are printed and displayed at the venue to give delegates easy onsite access to the stacks.

3. Save your stack

Screenshot showing location of Stack Summary fields and the Save Stack button

4. Close the editor

Screenshot showing location of the Close Editor button

5. You will now see the updated summary view of your stack containing the information you have added. The full list of authors will not appear in the stack summary view, but delegates will see it if they hover over the main author name in the summary view.

Screenshot showing location of the stack summary

If you want to make further changes to the stack summary then you can edit the stack again, update the information in the Stack Summary area and save your stack. The stack summary will again be updated.

Adding a PowerPoint file to your stack

When your stack is published to the showcase then viewers will see its summary view and be able to click on its title to open and explore its content.

Screenshot showing the stack summary view

You add the information that is used to create the Stack Summary view in the Stack Summary area in the editor. Adding more information helps your stack stand out in the showcase and also helps it to be found when people search the showcase.

To add this information to your ePoster stack, edit your stack and then:

1. Click on the Stack Summary tab

Screenshot showing the location of the Stack Summary tab
The Stack Summary tab

2. Fill in (or check) the information requested in this area (Stack title, Authors, Author affiliations, Stack summary, Stack summary image and Tags).

You usually do not need to fill in the Extra Information boxes at the bottom of the Stack Summary area unless your conference is onsite (rather than virtual). This extra information is only used on the printable summary posters. Summary posters tend to be used by onsite conferences. They are printed and displayed at the venue to give delegates easy onsite access to the stacks.

3. Save your stack

Screenshot showing location of Stack Summary fields and the Save Stack button

4. Close the editor

Screenshot showing location of the Close Editor button

5. You will now see the updated summary view of your stack containing the information you have added. The full list of authors will not appear in the stack summary view, but delegates will see it if they hover over the main author name in the summary view.

Screenshot showing location of the stack summary

If you want to make further changes to the stack summary then you can edit the stack again, update the information in the Stack Summary area and save your stack. The stack summary will again be updated.

Adding a video to your stack

When your stack is published to the showcase then viewers will see its summary view and be able to click on its title to open and explore its content.

Screenshot showing the stack summary view

You add the information that is used to create the Stack Summary view in the Stack Summary area in the editor. Adding more information helps your stack stand out in the showcase and also helps it to be found when people search the showcase.

To add this information to your ePoster stack, edit your stack and then:

1. Click on the Stack Summary tab

Screenshot showing the location of the Stack Summary tab
The Stack Summary tab

2. Fill in (or check) the information requested in this area (Stack title, Authors, Author affiliations, Stack summary, Stack summary image and Tags).

You usually do not need to fill in the Extra Information boxes at the bottom of the Stack Summary area unless your conference is onsite (rather than virtual). This extra information is only used on the printable summary posters. Summary posters tend to be used by onsite conferences. They are printed and displayed at the venue to give delegates easy onsite access to the stacks.

3. Save your stack

Screenshot showing location of Stack Summary fields and the Save Stack button

4. Close the editor

Screenshot showing location of the Close Editor button

5. You will now see the updated summary view of your stack containing the information you have added. The full list of authors will not appear in the stack summary view, but delegates will see it if they hover over the main author name in the summary view.

Screenshot showing location of the stack summary

If you want to make further changes to the stack summary then you can edit the stack again, update the information in the Stack Summary area and save your stack. The stack summary will again be updated.

Adding an extra screen/layer to your stack

When your stack is published to the showcase then viewers will see its summary view and be able to click on its title to open and explore its content.

Screenshot showing the stack summary view

You add the information that is used to create the Stack Summary view in the Stack Summary area in the editor. Adding more information helps your stack stand out in the showcase and also helps it to be found when people search the showcase.

To add this information to your ePoster stack, edit your stack and then:

1. Click on the Stack Summary tab

Screenshot showing the location of the Stack Summary tab
The Stack Summary tab

2. Fill in (or check) the information requested in this area (Stack title, Authors, Author affiliations, Stack summary, Stack summary image and Tags).

You usually do not need to fill in the Extra Information boxes at the bottom of the Stack Summary area unless your conference is onsite (rather than virtual). This extra information is only used on the printable summary posters. Summary posters tend to be used by onsite conferences. They are printed and displayed at the venue to give delegates easy onsite access to the stacks.

3. Save your stack

Screenshot showing location of Stack Summary fields and the Save Stack button

4. Close the editor

Screenshot showing location of the Close Editor button

5. You will now see the updated summary view of your stack containing the information you have added. The full list of authors will not appear in the stack summary view, but delegates will see it if they hover over the main author name in the summary view.

Screenshot showing location of the stack summary

If you want to make further changes to the stack summary then you can edit the stack again, update the information in the Stack Summary area and save your stack. The stack summary will again be updated.

Restrictions on what can be included in your stack

When your stack is published to the showcase then viewers will see its summary view and be able to click on its title to open and explore its content.

Screenshot showing the stack summary view

You add the information that is used to create the Stack Summary view in the Stack Summary area in the editor. Adding more information helps your stack stand out in the showcase and also helps it to be found when people search the showcase.

To add this information to your ePoster stack, edit your stack and then:

1. Click on the Stack Summary tab

Screenshot showing the location of the Stack Summary tab
The Stack Summary tab

2. Fill in (or check) the information requested in this area (Stack title, Authors, Author affiliations, Stack summary, Stack summary image and Tags).

You usually do not need to fill in the Extra Information boxes at the bottom of the Stack Summary area unless your conference is onsite (rather than virtual). This extra information is only used on the printable summary posters. Summary posters tend to be used by onsite conferences. They are printed and displayed at the venue to give delegates easy onsite access to the stacks.

3. Save your stack

Screenshot showing location of Stack Summary fields and the Save Stack button

4. Close the editor

Screenshot showing location of the Close Editor button

5. You will now see the updated summary view of your stack containing the information you have added. The full list of authors will not appear in the stack summary view, but delegates will see it if they hover over the main author name in the summary view.

Screenshot showing location of the stack summary

If you want to make further changes to the stack summary then you can edit the stack again, update the information in the Stack Summary area and save your stack. The stack summary will again be updated.

Restoring your deleted stack

When your stack is published to the showcase then viewers will see its summary view and be able to click on its title to open and explore its content.

Screenshot showing the stack summary view

You add the information that is used to create the Stack Summary view in the Stack Summary area in the editor. Adding more information helps your stack stand out in the showcase and also helps it to be found when people search the showcase.

To add this information to your ePoster stack, edit your stack and then:

1. Click on the Stack Summary tab

Screenshot showing the location of the Stack Summary tab
The Stack Summary tab

2. Fill in (or check) the information requested in this area (Stack title, Authors, Author affiliations, Stack summary, Stack summary image and Tags).

You usually do not need to fill in the Extra Information boxes at the bottom of the Stack Summary area unless your conference is onsite (rather than virtual). This extra information is only used on the printable summary posters. Summary posters tend to be used by onsite conferences. They are printed and displayed at the venue to give delegates easy onsite access to the stacks.

3. Save your stack

Screenshot showing location of Stack Summary fields and the Save Stack button

4. Close the editor

Screenshot showing location of the Close Editor button

5. You will now see the updated summary view of your stack containing the information you have added. The full list of authors will not appear in the stack summary view, but delegates will see it if they hover over the main author name in the summary view.

Screenshot showing location of the stack summary

If you want to make further changes to the stack summary then you can edit the stack again, update the information in the Stack Summary area and save your stack. The stack summary will again be updated.

Previewing and checking your stack

When your stack is published to the showcase then viewers will see its summary view and be able to click on its title to open and explore its content.

Screenshot showing the stack summary view

You add the information that is used to create the Stack Summary view in the Stack Summary area in the editor. Adding more information helps your stack stand out in the showcase and also helps it to be found when people search the showcase.

To add this information to your ePoster stack, edit your stack and then:

1. Click on the Stack Summary tab

Screenshot showing the location of the Stack Summary tab
The Stack Summary tab

2. Fill in (or check) the information requested in this area (Stack title, Authors, Author affiliations, Stack summary, Stack summary image and Tags).

You usually do not need to fill in the Extra Information boxes at the bottom of the Stack Summary area unless your conference is onsite (rather than virtual). This extra information is only used on the printable summary posters. Summary posters tend to be used by onsite conferences. They are printed and displayed at the venue to give delegates easy onsite access to the stacks.

3. Save your stack

Screenshot showing location of Stack Summary fields and the Save Stack button

4. Close the editor

Screenshot showing location of the Close Editor button

5. You will now see the updated summary view of your stack containing the information you have added. The full list of authors will not appear in the stack summary view, but delegates will see it if they hover over the main author name in the summary view.

Screenshot showing location of the stack summary

If you want to make further changes to the stack summary then you can edit the stack again, update the information in the Stack Summary area and save your stack. The stack summary will again be updated.

Creating the summary poster

An option often used by onsite conferences to promote your ePoster / stack onsite.

When your stack is published to the showcase then viewers will see its summary view and be able to click on its title to open and explore its content.

Screenshot showing the stack summary view

You add the information that is used to create the Stack Summary view in the Stack Summary area in the editor. Adding more information helps your stack stand out in the showcase and also helps it to be found when people search the showcase.

To add this information to your ePoster stack, edit your stack and then:

1. Click on the Stack Summary tab

Screenshot showing the location of the Stack Summary tab
The Stack Summary tab

2. Fill in (or check) the information requested in this area (Stack title, Authors, Author affiliations, Stack summary, Stack summary image and Tags).

You usually do not need to fill in the Extra Information boxes at the bottom of the Stack Summary area unless your conference is onsite (rather than virtual). This extra information is only used on the printable summary posters. Summary posters tend to be used by onsite conferences. They are printed and displayed at the venue to give delegates easy onsite access to the stacks.

3. Save your stack

Screenshot showing location of Stack Summary fields and the Save Stack button

4. Close the editor

Screenshot showing location of the Close Editor button

5. You will now see the updated summary view of your stack containing the information you have added. The full list of authors will not appear in the stack summary view, but delegates will see it if they hover over the main author name in the summary view.

Screenshot showing location of the stack summary

If you want to make further changes to the stack summary then you can edit the stack again, update the information in the Stack Summary area and save your stack. The stack summary will again be updated.

Your stack on the showcase website

When your stack is published to the showcase then viewers will see its summary view and be able to click on its title to open and explore its content.

Screenshot showing the stack summary view

You add the information that is used to create the Stack Summary view in the Stack Summary area in the editor. Adding more information helps your stack stand out in the showcase and also helps it to be found when people search the showcase.

To add this information to your ePoster stack, edit your stack and then:

1. Click on the Stack Summary tab

Screenshot showing the location of the Stack Summary tab
The Stack Summary tab

2. Fill in (or check) the information requested in this area (Stack title, Authors, Author affiliations, Stack summary, Stack summary image and Tags).

You usually do not need to fill in the Extra Information boxes at the bottom of the Stack Summary area unless your conference is onsite (rather than virtual). This extra information is only used on the printable summary posters. Summary posters tend to be used by onsite conferences. They are printed and displayed at the venue to give delegates easy onsite access to the stacks.

3. Save your stack

Screenshot showing location of Stack Summary fields and the Save Stack button

4. Close the editor

Screenshot showing location of the Close Editor button

5. You will now see the updated summary view of your stack containing the information you have added. The full list of authors will not appear in the stack summary view, but delegates will see it if they hover over the main author name in the summary view.

Screenshot showing location of the stack summary

If you want to make further changes to the stack summary then you can edit the stack again, update the information in the Stack Summary area and save your stack. The stack summary will again be updated.

Marking your stack as ready to publish to the showcase

When your stack is published to the showcase then viewers will see its summary view and be able to click on its title to open and explore its content.

Screenshot showing the stack summary view

You add the information that is used to create the Stack Summary view in the Stack Summary area in the editor. Adding more information helps your stack stand out in the showcase and also helps it to be found when people search the showcase.

To add this information to your ePoster stack, edit your stack and then:

1. Click on the Stack Summary tab

Screenshot showing the location of the Stack Summary tab
The Stack Summary tab

2. Fill in (or check) the information requested in this area (Stack title, Authors, Author affiliations, Stack summary, Stack summary image and Tags).

You usually do not need to fill in the Extra Information boxes at the bottom of the Stack Summary area unless your conference is onsite (rather than virtual). This extra information is only used on the printable summary posters. Summary posters tend to be used by onsite conferences. They are printed and displayed at the venue to give delegates easy onsite access to the stacks.

3. Save your stack

Screenshot showing location of Stack Summary fields and the Save Stack button

4. Close the editor

Screenshot showing location of the Close Editor button

5. You will now see the updated summary view of your stack containing the information you have added. The full list of authors will not appear in the stack summary view, but delegates will see it if they hover over the main author name in the summary view.

Screenshot showing location of the stack summary

If you want to make further changes to the stack summary then you can edit the stack again, update the information in the Stack Summary area and save your stack. The stack summary will again be updated.

Presenting your stack (General advice)

When your stack is published to the showcase then viewers will see its summary view and be able to click on its title to open and explore its content.

Screenshot showing the stack summary view

You add the information that is used to create the Stack Summary view in the Stack Summary area in the editor. Adding more information helps your stack stand out in the showcase and also helps it to be found when people search the showcase.

To add this information to your ePoster stack, edit your stack and then:

1. Click on the Stack Summary tab

Screenshot showing the location of the Stack Summary tab
The Stack Summary tab

2. Fill in (or check) the information requested in this area (Stack title, Authors, Author affiliations, Stack summary, Stack summary image and Tags).

You usually do not need to fill in the Extra Information boxes at the bottom of the Stack Summary area unless your conference is onsite (rather than virtual). This extra information is only used on the printable summary posters. Summary posters tend to be used by onsite conferences. They are printed and displayed at the venue to give delegates easy onsite access to the stacks.

3. Save your stack

Screenshot showing location of Stack Summary fields and the Save Stack button

4. Close the editor

Screenshot showing location of the Close Editor button

5. You will now see the updated summary view of your stack containing the information you have added. The full list of authors will not appear in the stack summary view, but delegates will see it if they hover over the main author name in the summary view.

Screenshot showing location of the stack summary

If you want to make further changes to the stack summary then you can edit the stack again, update the information in the Stack Summary area and save your stack. The stack summary will again be updated.

Exploring and sharing published stacks

When your stack is published to the showcase then viewers will see its summary view and be able to click on its title to open and explore its content.

Screenshot showing the stack summary view

You add the information that is used to create the Stack Summary view in the Stack Summary area in the editor. Adding more information helps your stack stand out in the showcase and also helps it to be found when people search the showcase.

To add this information to your ePoster stack, edit your stack and then:

1. Click on the Stack Summary tab

Screenshot showing the location of the Stack Summary tab
The Stack Summary tab

2. Fill in (or check) the information requested in this area (Stack title, Authors, Author affiliations, Stack summary, Stack summary image and Tags).

You usually do not need to fill in the Extra Information boxes at the bottom of the Stack Summary area unless your conference is onsite (rather than virtual). This extra information is only used on the printable summary posters. Summary posters tend to be used by onsite conferences. They are printed and displayed at the venue to give delegates easy onsite access to the stacks.

3. Save your stack

Screenshot showing location of Stack Summary fields and the Save Stack button

4. Close the editor

Screenshot showing location of the Close Editor button

5. You will now see the updated summary view of your stack containing the information you have added. The full list of authors will not appear in the stack summary view, but delegates will see it if they hover over the main author name in the summary view.

Screenshot showing location of the stack summary

If you want to make further changes to the stack summary then you can edit the stack again, update the information in the Stack Summary area and save your stack. The stack summary will again be updated.

Engaging with the viewers of your stacks

When your stack is published to the showcase then viewers will see its summary view and be able to click on its title to open and explore its content.

Screenshot showing the stack summary view

You add the information that is used to create the Stack Summary view in the Stack Summary area in the editor. Adding more information helps your stack stand out in the showcase and also helps it to be found when people search the showcase.

To add this information to your ePoster stack, edit your stack and then:

1. Click on the Stack Summary tab

Screenshot showing the location of the Stack Summary tab
The Stack Summary tab

2. Fill in (or check) the information requested in this area (Stack title, Authors, Author affiliations, Stack summary, Stack summary image and Tags).

You usually do not need to fill in the Extra Information boxes at the bottom of the Stack Summary area unless your conference is onsite (rather than virtual). This extra information is only used on the printable summary posters. Summary posters tend to be used by onsite conferences. They are printed and displayed at the venue to give delegates easy onsite access to the stacks.

3. Save your stack

Screenshot showing location of Stack Summary fields and the Save Stack button

4. Close the editor

Screenshot showing location of the Close Editor button

5. You will now see the updated summary view of your stack containing the information you have added. The full list of authors will not appear in the stack summary view, but delegates will see it if they hover over the main author name in the summary view.

Screenshot showing location of the stack summary

If you want to make further changes to the stack summary then you can edit the stack again, update the information in the Stack Summary area and save your stack. The stack summary will again be updated.

Using templates

When your stack is published to the showcase then viewers will see its summary view and be able to click on its title to open and explore its content.

Screenshot showing the stack summary view

You add the information that is used to create the Stack Summary view in the Stack Summary area in the editor. Adding more information helps your stack stand out in the showcase and also helps it to be found when people search the showcase.

To add this information to your ePoster stack, edit your stack and then:

1. Click on the Stack Summary tab

Screenshot showing the location of the Stack Summary tab
The Stack Summary tab

2. Fill in (or check) the information requested in this area (Stack title, Authors, Author affiliations, Stack summary, Stack summary image and Tags).

You usually do not need to fill in the Extra Information boxes at the bottom of the Stack Summary area unless your conference is onsite (rather than virtual). This extra information is only used on the printable summary posters. Summary posters tend to be used by onsite conferences. They are printed and displayed at the venue to give delegates easy onsite access to the stacks.

3. Save your stack

Screenshot showing location of Stack Summary fields and the Save Stack button

4. Close the editor

Screenshot showing location of the Close Editor button

5. You will now see the updated summary view of your stack containing the information you have added. The full list of authors will not appear in the stack summary view, but delegates will see it if they hover over the main author name in the summary view.

Screenshot showing location of the stack summary

If you want to make further changes to the stack summary then you can edit the stack again, update the information in the Stack Summary area and save your stack. The stack summary will again be updated.

Editing your account

When your stack is published to the showcase then viewers will see its summary view and be able to click on its title to open and explore its content.

Screenshot showing the stack summary view

You add the information that is used to create the Stack Summary view in the Stack Summary area in the editor. Adding more information helps your stack stand out in the showcase and also helps it to be found when people search the showcase.

To add this information to your ePoster stack, edit your stack and then:

1. Click on the Stack Summary tab

Screenshot showing the location of the Stack Summary tab
The Stack Summary tab

2. Fill in (or check) the information requested in this area (Stack title, Authors, Author affiliations, Stack summary, Stack summary image and Tags).

You usually do not need to fill in the Extra Information boxes at the bottom of the Stack Summary area unless your conference is onsite (rather than virtual). This extra information is only used on the printable summary posters. Summary posters tend to be used by onsite conferences. They are printed and displayed at the venue to give delegates easy onsite access to the stacks.

3. Save your stack

Screenshot showing location of Stack Summary fields and the Save Stack button

4. Close the editor

Screenshot showing location of the Close Editor button

5. You will now see the updated summary view of your stack containing the information you have added. The full list of authors will not appear in the stack summary view, but delegates will see it if they hover over the main author name in the summary view.

Screenshot showing location of the stack summary

If you want to make further changes to the stack summary then you can edit the stack again, update the information in the Stack Summary area and save your stack. The stack summary will again be updated.