Question 1

How do you add content to your stack?

Tamsin Treasure-Jones · Accepted Answer

There are three main sections to the Learning Toolbox editing screen:

The tile library shows all the different types of content you can add to your stack.
Your stack. You see your stack as you build it. It is shown as it would appear on a mobile phone.
The settings. The settings area changes dynamically depending on which part of the stack you are editing.

You add content to your stack by dragging the relevant tile from the tile library into your stack and then filling in the information required in the settings area. A summary of the type of information you can add using each Tile is shown below.

Question 2

How do you add content to your stack?

Tamsin Treasure-Jones · Accepted Answer

There are three main sections to the Learning Toolbox editing screen:

The tile library shows all the different types of content you can add to your stack.
Your stack. You see your stack as you build it. It is shown as it would appear on a mobile phone.
The settings. The settings area changes dynamically depending on which part of the stack you are editing.

You add content to your stack by dragging the relevant tile from the tile library into your stack and then filling in the information required in the settings area. A summary of the type of information you can add using each Tile is shown below.

Question 3

How do you add content to your stack?

Tamsin Treasure-Jones · Accepted Answer

There are three main sections to the Learning Toolbox editing screen:

The tile library shows all the different types of content you can add to your stack.
Your stack. You see your stack as you build it. It is shown as it would appear on a mobile phone.
The settings. The settings area changes dynamically depending on which part of the stack you are editing.

You add content to your stack by dragging the relevant tile from the tile library into your stack and then filling in the information required in the settings area. A summary of the type of information you can add using each Tile is shown below.

Question 4

How do you add content to your stack?

Tamsin Treasure-Jones · Accepted Answer

There are three main sections to the Learning Toolbox editing screen:

The tile library shows all the different types of content you can add to your stack.
Your stack. You see your stack as you build it. It is shown as it would appear on a mobile phone.
The settings. The settings area changes dynamically depending on which part of the stack you are editing.

You add content to your stack by dragging the relevant tile from the tile library into your stack and then filling in the information required in the settings area. A summary of the type of information you can add using each Tile is shown below.

Question 5

How do you add content to your stack?

Tamsin Treasure-Jones · Accepted Answer

There are three main sections to the Learning Toolbox editing screen:

The tile library shows all the different types of content you can add to your stack.
Your stack. You see your stack as you build it. It is shown as it would appear on a mobile phone.
The settings. The settings area changes dynamically depending on which part of the stack you are editing.

You add content to your stack by dragging the relevant tile from the tile library into your stack and then filling in the information required in the settings area. A summary of the type of information you can add using each Tile is shown below.

Question 6

How do you add content to your stack?

Tamsin Treasure-Jones · Accepted Answer

There are three main sections to the Learning Toolbox editing screen:

The tile library shows all the different types of content you can add to your stack.
Your stack. You see your stack as you build it. It is shown as it would appear on a mobile phone.
The settings. The settings area changes dynamically depending on which part of the stack you are editing.

You add content to your stack by dragging the relevant tile from the tile library into your stack and then filling in the information required in the settings area. A summary of the type of information you can add using each Tile is shown below.

Question 7

How do you add content to your stack?

Tamsin Treasure-Jones · Accepted Answer

There are three main sections to the Learning Toolbox editing screen:

The tile library shows all the different types of content you can add to your stack.
Your stack. You see your stack as you build it. It is shown as it would appear on a mobile phone.
The settings. The settings area changes dynamically depending on which part of the stack you are editing.

You add content to your stack by dragging the relevant tile from the tile library into your stack and then filling in the information required in the settings area. A summary of the type of information you can add using each Tile is shown below.

Question 8

How do you add content to your stack?

Tamsin Treasure-Jones · Accepted Answer

There are three main sections to the Learning Toolbox editing screen:

The tile library shows all the different types of content you can add to your stack.
Your stack. You see your stack as you build it. It is shown as it would appear on a mobile phone.
The settings. The settings area changes dynamically depending on which part of the stack you are editing.

You add content to your stack by dragging the relevant tile from the tile library into your stack and then filling in the information required in the settings area. A summary of the type of information you can add using each Tile is shown below.

Question 9

How do you add content to your stack?

Tamsin Treasure-Jones · Accepted Answer

There are three main sections to the Learning Toolbox editing screen:

The tile library shows all the different types of content you can add to your stack.
Your stack. You see your stack as you build it. It is shown as it would appear on a mobile phone.
The settings. The settings area changes dynamically depending on which part of the stack you are editing.

You add content to your stack by dragging the relevant tile from the tile library into your stack and then filling in the information required in the settings area. A summary of the type of information you can add using each Tile is shown below.

Question 10

How do you add content to your stack?

Tamsin Treasure-Jones · Accepted Answer

There are three main sections to the Learning Toolbox editing screen:

The tile library shows all the different types of content you can add to your stack.
Your stack. You see your stack as you build it. It is shown as it would appear on a mobile phone.
The settings. The settings area changes dynamically depending on which part of the stack you are editing.

You add content to your stack by dragging the relevant tile from the tile library into your stack and then filling in the information required in the settings area. A summary of the type of information you can add using each Tile is shown below.

Question 11

How do you add content to your stack?

Tamsin Treasure-Jones · Accepted Answer

There are three main sections to the Learning Toolbox editing screen:

The tile library shows all the different types of content you can add to your stack.
Your stack. You see your stack as you build it. It is shown as it would appear on a mobile phone.
The settings. The settings area changes dynamically depending on which part of the stack you are editing.

You add content to your stack by dragging the relevant tile from the tile library into your stack and then filling in the information required in the settings area. A summary of the type of information you can add using each Tile is shown below.

Question 12

How do you add content to your stack?

Tamsin Treasure-Jones · Accepted Answer

There are three main sections to the Learning Toolbox editing screen:

The tile library shows all the different types of content you can add to your stack.
Your stack. You see your stack as you build it. It is shown as it would appear on a mobile phone.
The settings. The settings area changes dynamically depending on which part of the stack you are editing.

You add content to your stack by dragging the relevant tile from the tile library into your stack and then filling in the information required in the settings area. A summary of the type of information you can add using each Tile is shown below.

Question 13

How do you add content to your stack?

Tamsin Treasure-Jones · Accepted Answer

There are three main sections to the Learning Toolbox editing screen:

The tile library shows all the different types of content you can add to your stack.
Your stack. You see your stack as you build it. It is shown as it would appear on a mobile phone.
The settings. The settings area changes dynamically depending on which part of the stack you are editing.

You add content to your stack by dragging the relevant tile from the tile library into your stack and then filling in the information required in the settings area. A summary of the type of information you can add using each Tile is shown below.

Question 14

How do you add content to your stack?

Tamsin Treasure-Jones · Accepted Answer

There are three main sections to the Learning Toolbox editing screen:

The tile library shows all the different types of content you can add to your stack.
Your stack. You see your stack as you build it. It is shown as it would appear on a mobile phone.
The settings. The settings area changes dynamically depending on which part of the stack you are editing.

You add content to your stack by dragging the relevant tile from the tile library into your stack and then filling in the information required in the settings area. A summary of the type of information you can add using each Tile is shown below.

Question 15

How do you add content to your stack?

Tamsin Treasure-Jones · Accepted Answer

There are three main sections to the Learning Toolbox editing screen:

The tile library shows all the different types of content you can add to your stack.
Your stack. You see your stack as you build it. It is shown as it would appear on a mobile phone.
The settings. The settings area changes dynamically depending on which part of the stack you are editing.

You add content to your stack by dragging the relevant tile from the tile library into your stack and then filling in the information required in the settings area. A summary of the type of information you can add using each Tile is shown below.

Question 16

How do you add content to your stack?

Tamsin Treasure-Jones · Accepted Answer

There are three main sections to the Learning Toolbox editing screen:

The tile library shows all the different types of content you can add to your stack.
Your stack. You see your stack as you build it. It is shown as it would appear on a mobile phone.
The settings. The settings area changes dynamically depending on which part of the stack you are editing.

You add content to your stack by dragging the relevant tile from the tile library into your stack and then filling in the information required in the settings area. A summary of the type of information you can add using each Tile is shown below.

Question 17

How do you add content to your stack?

Tamsin Treasure-Jones · Accepted Answer

There are three main sections to the Learning Toolbox editing screen:

The tile library shows all the different types of content you can add to your stack.
Your stack. You see your stack as you build it. It is shown as it would appear on a mobile phone.
The settings. The settings area changes dynamically depending on which part of the stack you are editing.

You add content to your stack by dragging the relevant tile from the tile library into your stack and then filling in the information required in the settings area. A summary of the type of information you can add using each Tile is shown below.

Question 18

How do you add content to your stack?

Tamsin Treasure-Jones · Accepted Answer

There are three main sections to the Learning Toolbox editing screen:

The tile library shows all the different types of content you can add to your stack.
Your stack. You see your stack as you build it. It is shown as it would appear on a mobile phone.
The settings. The settings area changes dynamically depending on which part of the stack you are editing.

You add content to your stack by dragging the relevant tile from the tile library into your stack and then filling in the information required in the settings area. A summary of the type of information you can add using each Tile is shown below.

Question 19

How do you add content to your stack?

Tamsin Treasure-Jones · Accepted Answer

There are three main sections to the Learning Toolbox editing screen:

The tile library shows all the different types of content you can add to your stack.
Your stack. You see your stack as you build it. It is shown as it would appear on a mobile phone.
The settings. The settings area changes dynamically depending on which part of the stack you are editing.

You add content to your stack by dragging the relevant tile from the tile library into your stack and then filling in the information required in the settings area. A summary of the type of information you can add using each Tile is shown below.

Question 20

How do you add content to your stack?

Tamsin Treasure-Jones · Accepted Answer

There are three main sections to the Learning Toolbox editing screen:

The tile library shows all the different types of content you can add to your stack.
Your stack. You see your stack as you build it. It is shown as it would appear on a mobile phone.
The settings. The settings area changes dynamically depending on which part of the stack you are editing.

You add content to your stack by dragging the relevant tile from the tile library into your stack and then filling in the information required in the settings area. A summary of the type of information you can add using each Tile is shown below.

Question 21

How do you add content to your stack?

Tamsin Treasure-Jones · Accepted Answer

There are three main sections to the Learning Toolbox editing screen:

The tile library shows all the different types of content you can add to your stack.
Your stack. You see your stack as you build it. It is shown as it would appear on a mobile phone.
The settings. The settings area changes dynamically depending on which part of the stack you are editing.

You add content to your stack by dragging the relevant tile from the tile library into your stack and then filling in the information required in the settings area. A summary of the type of information you can add using each Tile is shown below.

Question 22

How do you add content to your stack?

Tamsin Treasure-Jones · Accepted Answer

There are three main sections to the Learning Toolbox editing screen:

The tile library shows all the different types of content you can add to your stack.
Your stack. You see your stack as you build it. It is shown as it would appear on a mobile phone.
The settings. The settings area changes dynamically depending on which part of the stack you are editing.

You add content to your stack by dragging the relevant tile from the tile library into your stack and then filling in the information required in the settings area. A summary of the type of information you can add using each Tile is shown below.