FAQ Page

Contents

Invitation links and getting started

Learning Toolbox automatically creates optimised and resized images to reduce use of bandwith without losing image quality. For tile background images¬†you want to make sure your that your cropped image ‚Äďthe square or oblong cut-out that you create using the LTB imagepicker‚Äst has at least 400 pixels. For your mini-Poster image you need to make sure that the cut-out has at least a 1000 pixel width, especially when you aim to have it printed. Don’t worry about measuring this exactly, you can just add the image and then preview your stack or generate your stack summary poster to see how it looks.
Category: FAQ Restrictions

You add content to your stack by dragging a tile from the Tile Library into the mobile phone view of your stack and then filling in the required information in the settings area.

A summary of the type of information you can add using each Tile is shown below.

Category: FAQ Restrictions

In short: Yes, there are legal restrictions. 

You should only upload material that you have permission to add. Even when material is in the public domain (such as websites), you should be careful to ensure that you are not presenting it as if it was your own.

There are two things to consider. Firstly the copyright of the material and secondly whether it contains protected content matter.

Copyright, Copyleft

As a rule of thumb: Do not upload the work of others as your own. Only upload content of others if they have given you permission (or if they have licensed it under Creative Commons).

Another option is to use materials that have been specifically marked as no rights reserved, public domain or copyleft. Usually these works are released under a Creative Commons CC0 license and allow you to freely use them for commercial and non-commercial purposes.

The Pixabay image library that is integrated in Learning Toolbox, provides over 1 million images that can be freely used.

Privacy, Portrait right  and trademarks

This mouse is not protected.

In addition you should consider if depicted contents may be subject to additional copyrights, property rights, trademarks, protrait right, etc. and may require the consent of a third party or the license of these rights. For example the Disney’s image of Mickey Mouse is a protected trademark.

Category: FAQ Restrictions

Creating and returning to edit your stack

Learning Toolbox automatically creates optimised and resized images to reduce use of bandwith without losing image quality.

For tile background images¬†you want to make sure your that your cropped image ‚Äďthe square or oblong cut-out that you create using the LTB imagepicker‚Äst has at least 400 pixels.

For your mini-Poster image you need to make sure that the cut-out has at least a 1000 pixel width, especially when you aim to have it printed.

Don’t worry about measuring this exactly, you can just add the image and then preview your stack or generate your stack summary poster to see how it looks.

Category: FAQ Restrictions

You add content to your stack by dragging a tile from the Tile Library into the mobile phone view of your stack and then filling in the required information in the settings area.

A summary of the type of information you can add using each Tile is shown below.

Category: FAQ Restrictions

In short: Yes, there are legal restrictions. 

You should only upload material that you have permission to add. Even when material is in the public domain (such as websites), you should be careful to ensure that you are not presenting it as if it was your own.

There are two things to consider. Firstly the copyright of the material and secondly whether it contains protected content matter.

Copyright, Copyleft

As a rule of thumb: Do not upload the work of others as your own. Only upload content of others if they have given you permission (or if they have licensed it under Creative Commons).

Another option is to use materials that have been specifically marked as no rights reserved, public domain or copyleft. Usually these works are released under a Creative Commons CC0 license and allow you to freely use them for commercial and non-commercial purposes.

The Pixabay image library that is integrated in Learning Toolbox, provides over 1 million images that can be freely used.

Privacy, Portrait right  and trademarks

This mouse is not protected.

In addition you should consider if depicted contents may be subject to additional copyrights, property rights, trademarks, protrait right, etc. and may require the consent of a third party or the license of these rights. For example the Disney’s image of Mickey Mouse is a protected trademark.

Category: FAQ Restrictions

Adding content to your stack using the Tile Library

Learning Toolbox automatically creates optimised and resized images to reduce use of bandwith without losing image quality.

For tile background images¬†you want to make sure your that your cropped image ‚Äďthe square or oblong cut-out that you create using the LTB imagepicker‚Äst has at least 400 pixels.

For your mini-Poster image you need to make sure that the cut-out has at least a 1000 pixel width, especially when you aim to have it printed.

Don’t worry about measuring this exactly, you can just add the image and then preview your stack or generate your stack summary poster to see how it looks.

Category: FAQ Restrictions

You add content to your stack by dragging a tile from the Tile Library into the mobile phone view of your stack and then filling in the required information in the settings area.

A summary of the type of information you can add using each Tile is shown below.

Category: FAQ Restrictions

In short: Yes, there are legal restrictions. 

You should only upload material that you have permission to add. Even when material is in the public domain (such as websites), you should be careful to ensure that you are not presenting it as if it was your own.

There are two things to consider. Firstly the copyright of the material and secondly whether it contains protected content matter.

Copyright, Copyleft

As a rule of thumb: Do not upload the work of others as your own. Only upload content of others if they have given you permission (or if they have licensed it under Creative Commons).

Another option is to use materials that have been specifically marked as no rights reserved, public domain or copyleft. Usually these works are released under a Creative Commons CC0 license and allow you to freely use them for commercial and non-commercial purposes.

The Pixabay image library that is integrated in Learning Toolbox, provides over 1 million images that can be freely used.

Privacy, Portrait right  and trademarks

This mouse is not protected.

In addition you should consider if depicted contents may be subject to additional copyrights, property rights, trademarks, protrait right, etc. and may require the consent of a third party or the license of these rights. For example the Disney’s image of Mickey Mouse is a protected trademark.

Category: FAQ Restrictions

Commonly used Tiles

Learning Toolbox automatically creates optimised and resized images to reduce use of bandwith without losing image quality.

For tile background images¬†you want to make sure your that your cropped image ‚Äďthe square or oblong cut-out that you create using the LTB imagepicker‚Äst has at least 400 pixels.

For your mini-Poster image you need to make sure that the cut-out has at least a 1000 pixel width, especially when you aim to have it printed.

Don’t worry about measuring this exactly, you can just add the image and then preview your stack or generate your stack summary poster to see how it looks.

Category: FAQ Restrictions

You add content to your stack by dragging a tile from the Tile Library into the mobile phone view of your stack and then filling in the required information in the settings area.

A summary of the type of information you can add using each Tile is shown below.

Category: FAQ Restrictions

In short: Yes, there are legal restrictions. 

You should only upload material that you have permission to add. Even when material is in the public domain (such as websites), you should be careful to ensure that you are not presenting it as if it was your own.

There are two things to consider. Firstly the copyright of the material and secondly whether it contains protected content matter.

Copyright, Copyleft

As a rule of thumb: Do not upload the work of others as your own. Only upload content of others if they have given you permission (or if they have licensed it under Creative Commons).

Another option is to use materials that have been specifically marked as no rights reserved, public domain or copyleft. Usually these works are released under a Creative Commons CC0 license and allow you to freely use them for commercial and non-commercial purposes.

The Pixabay image library that is integrated in Learning Toolbox, provides over 1 million images that can be freely used.

Privacy, Portrait right  and trademarks

This mouse is not protected.

In addition you should consider if depicted contents may be subject to additional copyrights, property rights, trademarks, protrait right, etc. and may require the consent of a third party or the license of these rights. For example the Disney’s image of Mickey Mouse is a protected trademark.

Category: FAQ Restrictions

Advanced Tiles

Learning Toolbox automatically creates optimised and resized images to reduce use of bandwith without losing image quality.

For tile background images¬†you want to make sure your that your cropped image ‚Äďthe square or oblong cut-out that you create using the LTB imagepicker‚Äst has at least 400 pixels.

For your mini-Poster image you need to make sure that the cut-out has at least a 1000 pixel width, especially when you aim to have it printed.

Don’t worry about measuring this exactly, you can just add the image and then preview your stack or generate your stack summary poster to see how it looks.

Category: FAQ Restrictions

You add content to your stack by dragging a tile from the Tile Library into the mobile phone view of your stack and then filling in the required information in the settings area.

A summary of the type of information you can add using each Tile is shown below.

Category: FAQ Restrictions

In short: Yes, there are legal restrictions. 

You should only upload material that you have permission to add. Even when material is in the public domain (such as websites), you should be careful to ensure that you are not presenting it as if it was your own.

There are two things to consider. Firstly the copyright of the material and secondly whether it contains protected content matter.

Copyright, Copyleft

As a rule of thumb: Do not upload the work of others as your own. Only upload content of others if they have given you permission (or if they have licensed it under Creative Commons).

Another option is to use materials that have been specifically marked as no rights reserved, public domain or copyleft. Usually these works are released under a Creative Commons CC0 license and allow you to freely use them for commercial and non-commercial purposes.

The Pixabay image library that is integrated in Learning Toolbox, provides over 1 million images that can be freely used.

Privacy, Portrait right  and trademarks

This mouse is not protected.

In addition you should consider if depicted contents may be subject to additional copyrights, property rights, trademarks, protrait right, etc. and may require the consent of a third party or the license of these rights. For example the Disney’s image of Mickey Mouse is a protected trademark.

Category: FAQ Restrictions

Co-authors

Learning Toolbox automatically creates optimised and resized images to reduce use of bandwith without losing image quality.

For tile background images¬†you want to make sure your that your cropped image ‚Äďthe square or oblong cut-out that you create using the LTB imagepicker‚Äst has at least 400 pixels.

For your mini-Poster image you need to make sure that the cut-out has at least a 1000 pixel width, especially when you aim to have it printed.

Don’t worry about measuring this exactly, you can just add the image and then preview your stack or generate your stack summary poster to see how it looks.

Category: FAQ Restrictions

You add content to your stack by dragging a tile from the Tile Library into the mobile phone view of your stack and then filling in the required information in the settings area.

A summary of the type of information you can add using each Tile is shown below.

Category: FAQ Restrictions

In short: Yes, there are legal restrictions. 

You should only upload material that you have permission to add. Even when material is in the public domain (such as websites), you should be careful to ensure that you are not presenting it as if it was your own.

There are two things to consider. Firstly the copyright of the material and secondly whether it contains protected content matter.

Copyright, Copyleft

As a rule of thumb: Do not upload the work of others as your own. Only upload content of others if they have given you permission (or if they have licensed it under Creative Commons).

Another option is to use materials that have been specifically marked as no rights reserved, public domain or copyleft. Usually these works are released under a Creative Commons CC0 license and allow you to freely use them for commercial and non-commercial purposes.

The Pixabay image library that is integrated in Learning Toolbox, provides over 1 million images that can be freely used.

Privacy, Portrait right  and trademarks

This mouse is not protected.

In addition you should consider if depicted contents may be subject to additional copyrights, property rights, trademarks, protrait right, etc. and may require the consent of a third party or the license of these rights. For example the Disney’s image of Mickey Mouse is a protected trademark.

Category: FAQ Restrictions

Editing Tiles

Learning Toolbox automatically creates optimised and resized images to reduce use of bandwith without losing image quality.

For tile background images¬†you want to make sure your that your cropped image ‚Äďthe square or oblong cut-out that you create using the LTB imagepicker‚Äst has at least 400 pixels.

For your mini-Poster image you need to make sure that the cut-out has at least a 1000 pixel width, especially when you aim to have it printed.

Don’t worry about measuring this exactly, you can just add the image and then preview your stack or generate your stack summary poster to see how it looks.

Category: FAQ Restrictions

You add content to your stack by dragging a tile from the Tile Library into the mobile phone view of your stack and then filling in the required information in the settings area.

A summary of the type of information you can add using each Tile is shown below.

Category: FAQ Restrictions

In short: Yes, there are legal restrictions. 

You should only upload material that you have permission to add. Even when material is in the public domain (such as websites), you should be careful to ensure that you are not presenting it as if it was your own.

There are two things to consider. Firstly the copyright of the material and secondly whether it contains protected content matter.

Copyright, Copyleft

As a rule of thumb: Do not upload the work of others as your own. Only upload content of others if they have given you permission (or if they have licensed it under Creative Commons).

Another option is to use materials that have been specifically marked as no rights reserved, public domain or copyleft. Usually these works are released under a Creative Commons CC0 license and allow you to freely use them for commercial and non-commercial purposes.

The Pixabay image library that is integrated in Learning Toolbox, provides over 1 million images that can be freely used.

Privacy, Portrait right  and trademarks

This mouse is not protected.

In addition you should consider if depicted contents may be subject to additional copyrights, property rights, trademarks, protrait right, etc. and may require the consent of a third party or the license of these rights. For example the Disney’s image of Mickey Mouse is a protected trademark.

Category: FAQ Restrictions

Changing the layout and appearance of a tile

Learning Toolbox automatically creates optimised and resized images to reduce use of bandwith without losing image quality.

For tile background images¬†you want to make sure your that your cropped image ‚Äďthe square or oblong cut-out that you create using the LTB imagepicker‚Äst has at least 400 pixels.

For your mini-Poster image you need to make sure that the cut-out has at least a 1000 pixel width, especially when you aim to have it printed.

Don’t worry about measuring this exactly, you can just add the image and then preview your stack or generate your stack summary poster to see how it looks.

Category: FAQ Restrictions

You add content to your stack by dragging a tile from the Tile Library into the mobile phone view of your stack and then filling in the required information in the settings area.

A summary of the type of information you can add using each Tile is shown below.

Category: FAQ Restrictions

In short: Yes, there are legal restrictions. 

You should only upload material that you have permission to add. Even when material is in the public domain (such as websites), you should be careful to ensure that you are not presenting it as if it was your own.

There are two things to consider. Firstly the copyright of the material and secondly whether it contains protected content matter.

Copyright, Copyleft

As a rule of thumb: Do not upload the work of others as your own. Only upload content of others if they have given you permission (or if they have licensed it under Creative Commons).

Another option is to use materials that have been specifically marked as no rights reserved, public domain or copyleft. Usually these works are released under a Creative Commons CC0 license and allow you to freely use them for commercial and non-commercial purposes.

The Pixabay image library that is integrated in Learning Toolbox, provides over 1 million images that can be freely used.

Privacy, Portrait right  and trademarks

This mouse is not protected.

In addition you should consider if depicted contents may be subject to additional copyrights, property rights, trademarks, protrait right, etc. and may require the consent of a third party or the license of these rights. For example the Disney’s image of Mickey Mouse is a protected trademark.

Category: FAQ Restrictions

Adding a PowerPoint file to your stack

Learning Toolbox automatically creates optimised and resized images to reduce use of bandwith without losing image quality.

For tile background images¬†you want to make sure your that your cropped image ‚Äďthe square or oblong cut-out that you create using the LTB imagepicker‚Äst has at least 400 pixels.

For your mini-Poster image you need to make sure that the cut-out has at least a 1000 pixel width, especially when you aim to have it printed.

Don’t worry about measuring this exactly, you can just add the image and then preview your stack or generate your stack summary poster to see how it looks.

Category: FAQ Restrictions

You add content to your stack by dragging a tile from the Tile Library into the mobile phone view of your stack and then filling in the required information in the settings area.

A summary of the type of information you can add using each Tile is shown below.

Category: FAQ Restrictions

In short: Yes, there are legal restrictions. 

You should only upload material that you have permission to add. Even when material is in the public domain (such as websites), you should be careful to ensure that you are not presenting it as if it was your own.

There are two things to consider. Firstly the copyright of the material and secondly whether it contains protected content matter.

Copyright, Copyleft

As a rule of thumb: Do not upload the work of others as your own. Only upload content of others if they have given you permission (or if they have licensed it under Creative Commons).

Another option is to use materials that have been specifically marked as no rights reserved, public domain or copyleft. Usually these works are released under a Creative Commons CC0 license and allow you to freely use them for commercial and non-commercial purposes.

The Pixabay image library that is integrated in Learning Toolbox, provides over 1 million images that can be freely used.

Privacy, Portrait right  and trademarks

This mouse is not protected.

In addition you should consider if depicted contents may be subject to additional copyrights, property rights, trademarks, protrait right, etc. and may require the consent of a third party or the license of these rights. For example the Disney’s image of Mickey Mouse is a protected trademark.

Category: FAQ Restrictions

Adding a video to your stack

Learning Toolbox automatically creates optimised and resized images to reduce use of bandwith without losing image quality.

For tile background images¬†you want to make sure your that your cropped image ‚Äďthe square or oblong cut-out that you create using the LTB imagepicker‚Äst has at least 400 pixels.

For your mini-Poster image you need to make sure that the cut-out has at least a 1000 pixel width, especially when you aim to have it printed.

Don’t worry about measuring this exactly, you can just add the image and then preview your stack or generate your stack summary poster to see how it looks.

Category: FAQ Restrictions

You add content to your stack by dragging a tile from the Tile Library into the mobile phone view of your stack and then filling in the required information in the settings area.

A summary of the type of information you can add using each Tile is shown below.

Category: FAQ Restrictions

In short: Yes, there are legal restrictions. 

You should only upload material that you have permission to add. Even when material is in the public domain (such as websites), you should be careful to ensure that you are not presenting it as if it was your own.

There are two things to consider. Firstly the copyright of the material and secondly whether it contains protected content matter.

Copyright, Copyleft

As a rule of thumb: Do not upload the work of others as your own. Only upload content of others if they have given you permission (or if they have licensed it under Creative Commons).

Another option is to use materials that have been specifically marked as no rights reserved, public domain or copyleft. Usually these works are released under a Creative Commons CC0 license and allow you to freely use them for commercial and non-commercial purposes.

The Pixabay image library that is integrated in Learning Toolbox, provides over 1 million images that can be freely used.

Privacy, Portrait right  and trademarks

This mouse is not protected.

In addition you should consider if depicted contents may be subject to additional copyrights, property rights, trademarks, protrait right, etc. and may require the consent of a third party or the license of these rights. For example the Disney’s image of Mickey Mouse is a protected trademark.

Category: FAQ Restrictions

Adding an extra screen/layer to your stack

Learning Toolbox automatically creates optimised and resized images to reduce use of bandwith without losing image quality.

For tile background images¬†you want to make sure your that your cropped image ‚Äďthe square or oblong cut-out that you create using the LTB imagepicker‚Äst has at least 400 pixels.

For your mini-Poster image you need to make sure that the cut-out has at least a 1000 pixel width, especially when you aim to have it printed.

Don’t worry about measuring this exactly, you can just add the image and then preview your stack or generate your stack summary poster to see how it looks.

Category: FAQ Restrictions

You add content to your stack by dragging a tile from the Tile Library into the mobile phone view of your stack and then filling in the required information in the settings area.

A summary of the type of information you can add using each Tile is shown below.

Category: FAQ Restrictions

In short: Yes, there are legal restrictions. 

You should only upload material that you have permission to add. Even when material is in the public domain (such as websites), you should be careful to ensure that you are not presenting it as if it was your own.

There are two things to consider. Firstly the copyright of the material and secondly whether it contains protected content matter.

Copyright, Copyleft

As a rule of thumb: Do not upload the work of others as your own. Only upload content of others if they have given you permission (or if they have licensed it under Creative Commons).

Another option is to use materials that have been specifically marked as no rights reserved, public domain or copyleft. Usually these works are released under a Creative Commons CC0 license and allow you to freely use them for commercial and non-commercial purposes.

The Pixabay image library that is integrated in Learning Toolbox, provides over 1 million images that can be freely used.

Privacy, Portrait right  and trademarks

This mouse is not protected.

In addition you should consider if depicted contents may be subject to additional copyrights, property rights, trademarks, protrait right, etc. and may require the consent of a third party or the license of these rights. For example the Disney’s image of Mickey Mouse is a protected trademark.

Category: FAQ Restrictions

Restrictions on what can be included in your stack

Learning Toolbox automatically creates optimised and resized images to reduce use of bandwith without losing image quality.

For tile background images¬†you want to make sure your that your cropped image ‚Äďthe square or oblong cut-out that you create using the LTB imagepicker‚Äst has at least 400 pixels.

For your mini-Poster image you need to make sure that the cut-out has at least a 1000 pixel width, especially when you aim to have it printed.

Don’t worry about measuring this exactly, you can just add the image and then preview your stack or generate your stack summary poster to see how it looks.

Category: FAQ Restrictions

You add content to your stack by dragging a tile from the Tile Library into the mobile phone view of your stack and then filling in the required information in the settings area.

A summary of the type of information you can add using each Tile is shown below.

Category: FAQ Restrictions

In short: Yes, there are legal restrictions. 

You should only upload material that you have permission to add. Even when material is in the public domain (such as websites), you should be careful to ensure that you are not presenting it as if it was your own.

There are two things to consider. Firstly the copyright of the material and secondly whether it contains protected content matter.

Copyright, Copyleft

As a rule of thumb: Do not upload the work of others as your own. Only upload content of others if they have given you permission (or if they have licensed it under Creative Commons).

Another option is to use materials that have been specifically marked as no rights reserved, public domain or copyleft. Usually these works are released under a Creative Commons CC0 license and allow you to freely use them for commercial and non-commercial purposes.

The Pixabay image library that is integrated in Learning Toolbox, provides over 1 million images that can be freely used.

Privacy, Portrait right  and trademarks

This mouse is not protected.

In addition you should consider if depicted contents may be subject to additional copyrights, property rights, trademarks, protrait right, etc. and may require the consent of a third party or the license of these rights. For example the Disney’s image of Mickey Mouse is a protected trademark.

Category: FAQ Restrictions

Restoring your deleted stack

Learning Toolbox automatically creates optimised and resized images to reduce use of bandwith without losing image quality.

For tile background images¬†you want to make sure your that your cropped image ‚Äďthe square or oblong cut-out that you create using the LTB imagepicker‚Äst has at least 400 pixels.

For your mini-Poster image you need to make sure that the cut-out has at least a 1000 pixel width, especially when you aim to have it printed.

Don’t worry about measuring this exactly, you can just add the image and then preview your stack or generate your stack summary poster to see how it looks.

Category: FAQ Restrictions

You add content to your stack by dragging a tile from the Tile Library into the mobile phone view of your stack and then filling in the required information in the settings area.

A summary of the type of information you can add using each Tile is shown below.

Category: FAQ Restrictions

In short: Yes, there are legal restrictions. 

You should only upload material that you have permission to add. Even when material is in the public domain (such as websites), you should be careful to ensure that you are not presenting it as if it was your own.

There are two things to consider. Firstly the copyright of the material and secondly whether it contains protected content matter.

Copyright, Copyleft

As a rule of thumb: Do not upload the work of others as your own. Only upload content of others if they have given you permission (or if they have licensed it under Creative Commons).

Another option is to use materials that have been specifically marked as no rights reserved, public domain or copyleft. Usually these works are released under a Creative Commons CC0 license and allow you to freely use them for commercial and non-commercial purposes.

The Pixabay image library that is integrated in Learning Toolbox, provides over 1 million images that can be freely used.

Privacy, Portrait right  and trademarks

This mouse is not protected.

In addition you should consider if depicted contents may be subject to additional copyrights, property rights, trademarks, protrait right, etc. and may require the consent of a third party or the license of these rights. For example the Disney’s image of Mickey Mouse is a protected trademark.

Category: FAQ Restrictions

Previewing and checking your stack

Learning Toolbox automatically creates optimised and resized images to reduce use of bandwith without losing image quality.

For tile background images¬†you want to make sure your that your cropped image ‚Äďthe square or oblong cut-out that you create using the LTB imagepicker‚Äst has at least 400 pixels.

For your mini-Poster image you need to make sure that the cut-out has at least a 1000 pixel width, especially when you aim to have it printed.

Don’t worry about measuring this exactly, you can just add the image and then preview your stack or generate your stack summary poster to see how it looks.

Category: FAQ Restrictions

You add content to your stack by dragging a tile from the Tile Library into the mobile phone view of your stack and then filling in the required information in the settings area.

A summary of the type of information you can add using each Tile is shown below.

Category: FAQ Restrictions

In short: Yes, there are legal restrictions. 

You should only upload material that you have permission to add. Even when material is in the public domain (such as websites), you should be careful to ensure that you are not presenting it as if it was your own.

There are two things to consider. Firstly the copyright of the material and secondly whether it contains protected content matter.

Copyright, Copyleft

As a rule of thumb: Do not upload the work of others as your own. Only upload content of others if they have given you permission (or if they have licensed it under Creative Commons).

Another option is to use materials that have been specifically marked as no rights reserved, public domain or copyleft. Usually these works are released under a Creative Commons CC0 license and allow you to freely use them for commercial and non-commercial purposes.

The Pixabay image library that is integrated in Learning Toolbox, provides over 1 million images that can be freely used.

Privacy, Portrait right  and trademarks

This mouse is not protected.

In addition you should consider if depicted contents may be subject to additional copyrights, property rights, trademarks, protrait right, etc. and may require the consent of a third party or the license of these rights. For example the Disney’s image of Mickey Mouse is a protected trademark.

Category: FAQ Restrictions

Creating the summary poster

An option often used by onsite conferences to promote your ePoster / stack onsite.

Learning Toolbox automatically creates optimised and resized images to reduce use of bandwith without losing image quality.

For tile background images¬†you want to make sure your that your cropped image ‚Äďthe square or oblong cut-out that you create using the LTB imagepicker‚Äst has at least 400 pixels.

For your mini-Poster image you need to make sure that the cut-out has at least a 1000 pixel width, especially when you aim to have it printed.

Don’t worry about measuring this exactly, you can just add the image and then preview your stack or generate your stack summary poster to see how it looks.

Category: FAQ Restrictions

You add content to your stack by dragging a tile from the Tile Library into the mobile phone view of your stack and then filling in the required information in the settings area.

A summary of the type of information you can add using each Tile is shown below.

Category: FAQ Restrictions

In short: Yes, there are legal restrictions. 

You should only upload material that you have permission to add. Even when material is in the public domain (such as websites), you should be careful to ensure that you are not presenting it as if it was your own.

There are two things to consider. Firstly the copyright of the material and secondly whether it contains protected content matter.

Copyright, Copyleft

As a rule of thumb: Do not upload the work of others as your own. Only upload content of others if they have given you permission (or if they have licensed it under Creative Commons).

Another option is to use materials that have been specifically marked as no rights reserved, public domain or copyleft. Usually these works are released under a Creative Commons CC0 license and allow you to freely use them for commercial and non-commercial purposes.

The Pixabay image library that is integrated in Learning Toolbox, provides over 1 million images that can be freely used.

Privacy, Portrait right  and trademarks

This mouse is not protected.

In addition you should consider if depicted contents may be subject to additional copyrights, property rights, trademarks, protrait right, etc. and may require the consent of a third party or the license of these rights. For example the Disney’s image of Mickey Mouse is a protected trademark.

Category: FAQ Restrictions

Your stack on the showcase website

Learning Toolbox automatically creates optimised and resized images to reduce use of bandwith without losing image quality.

For tile background images¬†you want to make sure your that your cropped image ‚Äďthe square or oblong cut-out that you create using the LTB imagepicker‚Äst has at least 400 pixels.

For your mini-Poster image you need to make sure that the cut-out has at least a 1000 pixel width, especially when you aim to have it printed.

Don’t worry about measuring this exactly, you can just add the image and then preview your stack or generate your stack summary poster to see how it looks.

Category: FAQ Restrictions

You add content to your stack by dragging a tile from the Tile Library into the mobile phone view of your stack and then filling in the required information in the settings area.

A summary of the type of information you can add using each Tile is shown below.

Category: FAQ Restrictions

In short: Yes, there are legal restrictions. 

You should only upload material that you have permission to add. Even when material is in the public domain (such as websites), you should be careful to ensure that you are not presenting it as if it was your own.

There are two things to consider. Firstly the copyright of the material and secondly whether it contains protected content matter.

Copyright, Copyleft

As a rule of thumb: Do not upload the work of others as your own. Only upload content of others if they have given you permission (or if they have licensed it under Creative Commons).

Another option is to use materials that have been specifically marked as no rights reserved, public domain or copyleft. Usually these works are released under a Creative Commons CC0 license and allow you to freely use them for commercial and non-commercial purposes.

The Pixabay image library that is integrated in Learning Toolbox, provides over 1 million images that can be freely used.

Privacy, Portrait right  and trademarks

This mouse is not protected.

In addition you should consider if depicted contents may be subject to additional copyrights, property rights, trademarks, protrait right, etc. and may require the consent of a third party or the license of these rights. For example the Disney’s image of Mickey Mouse is a protected trademark.

Category: FAQ Restrictions

Marking your stack as ready to publish to the showcase

Learning Toolbox automatically creates optimised and resized images to reduce use of bandwith without losing image quality.

For tile background images¬†you want to make sure your that your cropped image ‚Äďthe square or oblong cut-out that you create using the LTB imagepicker‚Äst has at least 400 pixels.

For your mini-Poster image you need to make sure that the cut-out has at least a 1000 pixel width, especially when you aim to have it printed.

Don’t worry about measuring this exactly, you can just add the image and then preview your stack or generate your stack summary poster to see how it looks.

Category: FAQ Restrictions

You add content to your stack by dragging a tile from the Tile Library into the mobile phone view of your stack and then filling in the required information in the settings area.

A summary of the type of information you can add using each Tile is shown below.

Category: FAQ Restrictions

In short: Yes, there are legal restrictions. 

You should only upload material that you have permission to add. Even when material is in the public domain (such as websites), you should be careful to ensure that you are not presenting it as if it was your own.

There are two things to consider. Firstly the copyright of the material and secondly whether it contains protected content matter.

Copyright, Copyleft

As a rule of thumb: Do not upload the work of others as your own. Only upload content of others if they have given you permission (or if they have licensed it under Creative Commons).

Another option is to use materials that have been specifically marked as no rights reserved, public domain or copyleft. Usually these works are released under a Creative Commons CC0 license and allow you to freely use them for commercial and non-commercial purposes.

The Pixabay image library that is integrated in Learning Toolbox, provides over 1 million images that can be freely used.

Privacy, Portrait right  and trademarks

This mouse is not protected.

In addition you should consider if depicted contents may be subject to additional copyrights, property rights, trademarks, protrait right, etc. and may require the consent of a third party or the license of these rights. For example the Disney’s image of Mickey Mouse is a protected trademark.

Category: FAQ Restrictions

Presenting your stack (General advice)

Learning Toolbox automatically creates optimised and resized images to reduce use of bandwith without losing image quality.

For tile background images¬†you want to make sure your that your cropped image ‚Äďthe square or oblong cut-out that you create using the LTB imagepicker‚Äst has at least 400 pixels.

For your mini-Poster image you need to make sure that the cut-out has at least a 1000 pixel width, especially when you aim to have it printed.

Don’t worry about measuring this exactly, you can just add the image and then preview your stack or generate your stack summary poster to see how it looks.

Category: FAQ Restrictions

You add content to your stack by dragging a tile from the Tile Library into the mobile phone view of your stack and then filling in the required information in the settings area.

A summary of the type of information you can add using each Tile is shown below.

Category: FAQ Restrictions

In short: Yes, there are legal restrictions. 

You should only upload material that you have permission to add. Even when material is in the public domain (such as websites), you should be careful to ensure that you are not presenting it as if it was your own.

There are two things to consider. Firstly the copyright of the material and secondly whether it contains protected content matter.

Copyright, Copyleft

As a rule of thumb: Do not upload the work of others as your own. Only upload content of others if they have given you permission (or if they have licensed it under Creative Commons).

Another option is to use materials that have been specifically marked as no rights reserved, public domain or copyleft. Usually these works are released under a Creative Commons CC0 license and allow you to freely use them for commercial and non-commercial purposes.

The Pixabay image library that is integrated in Learning Toolbox, provides over 1 million images that can be freely used.

Privacy, Portrait right  and trademarks

This mouse is not protected.

In addition you should consider if depicted contents may be subject to additional copyrights, property rights, trademarks, protrait right, etc. and may require the consent of a third party or the license of these rights. For example the Disney’s image of Mickey Mouse is a protected trademark.

Category: FAQ Restrictions

Exploring and sharing published stacks

Learning Toolbox automatically creates optimised and resized images to reduce use of bandwith without losing image quality.

For tile background images¬†you want to make sure your that your cropped image ‚Äďthe square or oblong cut-out that you create using the LTB imagepicker‚Äst has at least 400 pixels.

For your mini-Poster image you need to make sure that the cut-out has at least a 1000 pixel width, especially when you aim to have it printed.

Don’t worry about measuring this exactly, you can just add the image and then preview your stack or generate your stack summary poster to see how it looks.

Category: FAQ Restrictions

You add content to your stack by dragging a tile from the Tile Library into the mobile phone view of your stack and then filling in the required information in the settings area.

A summary of the type of information you can add using each Tile is shown below.

Category: FAQ Restrictions

In short: Yes, there are legal restrictions. 

You should only upload material that you have permission to add. Even when material is in the public domain (such as websites), you should be careful to ensure that you are not presenting it as if it was your own.

There are two things to consider. Firstly the copyright of the material and secondly whether it contains protected content matter.

Copyright, Copyleft

As a rule of thumb: Do not upload the work of others as your own. Only upload content of others if they have given you permission (or if they have licensed it under Creative Commons).

Another option is to use materials that have been specifically marked as no rights reserved, public domain or copyleft. Usually these works are released under a Creative Commons CC0 license and allow you to freely use them for commercial and non-commercial purposes.

The Pixabay image library that is integrated in Learning Toolbox, provides over 1 million images that can be freely used.

Privacy, Portrait right  and trademarks

This mouse is not protected.

In addition you should consider if depicted contents may be subject to additional copyrights, property rights, trademarks, protrait right, etc. and may require the consent of a third party or the license of these rights. For example the Disney’s image of Mickey Mouse is a protected trademark.

Category: FAQ Restrictions

Engaging with the viewers of your stacks

Learning Toolbox automatically creates optimised and resized images to reduce use of bandwith without losing image quality.

For tile background images¬†you want to make sure your that your cropped image ‚Äďthe square or oblong cut-out that you create using the LTB imagepicker‚Äst has at least 400 pixels.

For your mini-Poster image you need to make sure that the cut-out has at least a 1000 pixel width, especially when you aim to have it printed.

Don’t worry about measuring this exactly, you can just add the image and then preview your stack or generate your stack summary poster to see how it looks.

Category: FAQ Restrictions

You add content to your stack by dragging a tile from the Tile Library into the mobile phone view of your stack and then filling in the required information in the settings area.

A summary of the type of information you can add using each Tile is shown below.

Category: FAQ Restrictions

In short: Yes, there are legal restrictions. 

You should only upload material that you have permission to add. Even when material is in the public domain (such as websites), you should be careful to ensure that you are not presenting it as if it was your own.

There are two things to consider. Firstly the copyright of the material and secondly whether it contains protected content matter.

Copyright, Copyleft

As a rule of thumb: Do not upload the work of others as your own. Only upload content of others if they have given you permission (or if they have licensed it under Creative Commons).

Another option is to use materials that have been specifically marked as no rights reserved, public domain or copyleft. Usually these works are released under a Creative Commons CC0 license and allow you to freely use them for commercial and non-commercial purposes.

The Pixabay image library that is integrated in Learning Toolbox, provides over 1 million images that can be freely used.

Privacy, Portrait right  and trademarks

This mouse is not protected.

In addition you should consider if depicted contents may be subject to additional copyrights, property rights, trademarks, protrait right, etc. and may require the consent of a third party or the license of these rights. For example the Disney’s image of Mickey Mouse is a protected trademark.

Category: FAQ Restrictions

Using templates

Learning Toolbox automatically creates optimised and resized images to reduce use of bandwith without losing image quality.

For tile background images¬†you want to make sure your that your cropped image ‚Äďthe square or oblong cut-out that you create using the LTB imagepicker‚Äst has at least 400 pixels.

For your mini-Poster image you need to make sure that the cut-out has at least a 1000 pixel width, especially when you aim to have it printed.

Don’t worry about measuring this exactly, you can just add the image and then preview your stack or generate your stack summary poster to see how it looks.

Category: FAQ Restrictions

You add content to your stack by dragging a tile from the Tile Library into the mobile phone view of your stack and then filling in the required information in the settings area.

A summary of the type of information you can add using each Tile is shown below.

Category: FAQ Restrictions

In short: Yes, there are legal restrictions. 

You should only upload material that you have permission to add. Even when material is in the public domain (such as websites), you should be careful to ensure that you are not presenting it as if it was your own.

There are two things to consider. Firstly the copyright of the material and secondly whether it contains protected content matter.

Copyright, Copyleft

As a rule of thumb: Do not upload the work of others as your own. Only upload content of others if they have given you permission (or if they have licensed it under Creative Commons).

Another option is to use materials that have been specifically marked as no rights reserved, public domain or copyleft. Usually these works are released under a Creative Commons CC0 license and allow you to freely use them for commercial and non-commercial purposes.

The Pixabay image library that is integrated in Learning Toolbox, provides over 1 million images that can be freely used.

Privacy, Portrait right  and trademarks

This mouse is not protected.

In addition you should consider if depicted contents may be subject to additional copyrights, property rights, trademarks, protrait right, etc. and may require the consent of a third party or the license of these rights. For example the Disney’s image of Mickey Mouse is a protected trademark.

Category: FAQ Restrictions

Editing your account

Learning Toolbox automatically creates optimised and resized images to reduce use of bandwith without losing image quality.

For tile background images¬†you want to make sure your that your cropped image ‚Äďthe square or oblong cut-out that you create using the LTB imagepicker‚Äst has at least 400 pixels.

For your mini-Poster image you need to make sure that the cut-out has at least a 1000 pixel width, especially when you aim to have it printed.

Don’t worry about measuring this exactly, you can just add the image and then preview your stack or generate your stack summary poster to see how it looks.

Category: FAQ Restrictions

You add content to your stack by dragging a tile from the Tile Library into the mobile phone view of your stack and then filling in the required information in the settings area.

A summary of the type of information you can add using each Tile is shown below.

Category: FAQ Restrictions

In short: Yes, there are legal restrictions. 

You should only upload material that you have permission to add. Even when material is in the public domain (such as websites), you should be careful to ensure that you are not presenting it as if it was your own.

There are two things to consider. Firstly the copyright of the material and secondly whether it contains protected content matter.

Copyright, Copyleft

As a rule of thumb: Do not upload the work of others as your own. Only upload content of others if they have given you permission (or if they have licensed it under Creative Commons).

Another option is to use materials that have been specifically marked as no rights reserved, public domain or copyleft. Usually these works are released under a Creative Commons CC0 license and allow you to freely use them for commercial and non-commercial purposes.

The Pixabay image library that is integrated in Learning Toolbox, provides over 1 million images that can be freely used.

Privacy, Portrait right  and trademarks

This mouse is not protected.

In addition you should consider if depicted contents may be subject to additional copyrights, property rights, trademarks, protrait right, etc. and may require the consent of a third party or the license of these rights. For example the Disney’s image of Mickey Mouse is a protected trademark.

Category: FAQ Restrictions