ePosters Support Page for AMEE

If you can’t find the answer to your question below then please contact us at support@stack.services

Key Information

AMEE 2021 Conference

If you are looking for general information about the AMEE 2021 Conference (rather than ePoster specific information) then please look at the AMEE 2021 Conference Page as it contains the full information about the conference.

AMEE 2021 – ePosters and Learning Toolbox

Load More

Load More

Load More

Load More

Webinars (26th May and 9th August)

Load More

Load More

Load More

Load More

General overview

Currently Learning Toolbox does not support live collaborative editing of an ePoster by multiple authors. Instead each ePoster has one person who takes on the editing author role.
If you have been sent an invite link to create an ePoster for a conference, then the first person who follows that link will be given the editing role.
 
The person who takes on the editing author role will be able to add their co-authors’ names to the ePoster by adding their names in the Stack Poster Details Tab and can also specify who will appear in the summary view as the Named Author. However, their co-authors will not be able to edit the ePoster.
 
The editing author can also share the link to the ePoster with their co-authors (How do I share an ePoster from my computer) so that their co-authors can view the developing ePoster and email them with any feedback or suggestions. If they do this then they should make sure they change the ePoster permissions from Private to Hidden and Anonymous Access (How do I set access permissions) before sending the link to their co-authors.
 
If your co-author has followed the invite link after you then they will get a message explaining that the link has already been used. If you would like to switch the editing role to them then just contact support (the team who are supporting your use of Learning Toolbox) and they will be able to do this for you.
 
Category: Co-authors

The Named Author space (1) allows you to decide which author’s name you want to appear on the summary view of the stack/ePoster in the showcase.

The default is that the editing author’s name will appear here, but you can change this to a different name. If you then save (2) and close the editor (3) then you will be able to see where the Named Author appears in your stack/ePoster’s summary view (4).

There is a character limit of 25 for the Named Author to ensure that it can be displayed within the summary view. This means you will not be able to list all the co-authors of a stack/ePoster within the Named Author space. Although you can use the academic convention of et al. to indicate within the Named Author space that there are more authors (e.g. I could edit the Named Author to be “T. Treasure-Jones et al.”)

You can also add all your co-authors details within the stack/ePoster itself. Many authors add a Text Tile listing all the co-authors. Another possible approach is to add a new Screen and on that new screen to add a Tile for each author which links to their professional webpage.

Category: Co-authors

Load More

Creating an ePoster/Stack

Currently Learning Toolbox does not support live collaborative editing of an ePoster by multiple authors. Instead each ePoster has one person who takes on the editing author role.
If you have been sent an invite link to create an ePoster for a conference, then the first person who follows that link will be given the editing role.
 
The person who takes on the editing author role will be able to add their co-authors’ names to the ePoster by adding their names in the Stack Poster Details Tab and can also specify who will appear in the summary view as the Named Author. However, their co-authors will not be able to edit the ePoster.
 
The editing author can also share the link to the ePoster with their co-authors (How do I share an ePoster from my computer) so that their co-authors can view the developing ePoster and email them with any feedback or suggestions. If they do this then they should make sure they change the ePoster permissions from Private to Hidden and Anonymous Access (How do I set access permissions) before sending the link to their co-authors.
 
If your co-author has followed the invite link after you then they will get a message explaining that the link has already been used. If you would like to switch the editing role to them then just contact support (the team who are supporting your use of Learning Toolbox) and they will be able to do this for you.
 
Category: Co-authors

The Named Author space (1) allows you to decide which author’s name you want to appear on the summary view of the stack/ePoster in the showcase.

The default is that the editing author’s name will appear here, but you can change this to a different name. If you then save (2) and close the editor (3) then you will be able to see where the Named Author appears in your stack/ePoster’s summary view (4).

There is a character limit of 25 for the Named Author to ensure that it can be displayed within the summary view. This means you will not be able to list all the co-authors of a stack/ePoster within the Named Author space. Although you can use the academic convention of et al. to indicate within the Named Author space that there are more authors (e.g. I could edit the Named Author to be “T. Treasure-Jones et al.”)

You can also add all your co-authors details within the stack/ePoster itself. Many authors add a Text Tile listing all the co-authors. Another possible approach is to add a new Screen and on that new screen to add a Tile for each author which links to their professional webpage.

Category: Co-authors

Load More

Answers to Frequently Asked Questions (FAQs)

Co-authors

Currently Learning Toolbox does not support live collaborative editing of an ePoster by multiple authors. Instead each ePoster has one person who takes on the editing author role.
If you have been sent an invite link to create an ePoster for a conference, then the first person who follows that link will be given the editing role.
 
The person who takes on the editing author role will be able to add their co-authors’ names to the ePoster by adding their names in the Stack Poster Details Tab and can also specify who will appear in the summary view as the Named Author. However, their co-authors will not be able to edit the ePoster.
 
The editing author can also share the link to the ePoster with their co-authors (How do I share an ePoster from my computer) so that their co-authors can view the developing ePoster and email them with any feedback or suggestions. If they do this then they should make sure they change the ePoster permissions from Private to Hidden and Anonymous Access (How do I set access permissions) before sending the link to their co-authors.
 
If your co-author has followed the invite link after you then they will get a message explaining that the link has already been used. If you would like to switch the editing role to them then just contact support (the team who are supporting your use of Learning Toolbox) and they will be able to do this for you.
 
Category: Co-authors

The Named Author space (1) allows you to decide which author’s name you want to appear on the summary view of the stack/ePoster in the showcase.

The default is that the editing author’s name will appear here, but you can change this to a different name. If you then save (2) and close the editor (3) then you will be able to see where the Named Author appears in your stack/ePoster’s summary view (4).

There is a character limit of 25 for the Named Author to ensure that it can be displayed within the summary view. This means you will not be able to list all the co-authors of a stack/ePoster within the Named Author space. Although you can use the academic convention of et al. to indicate within the Named Author space that there are more authors (e.g. I could edit the Named Author to be “T. Treasure-Jones et al.”)

You can also add all your co-authors details within the stack/ePoster itself. Many authors add a Text Tile listing all the co-authors. Another possible approach is to add a new Screen and on that new screen to add a Tile for each author which links to their professional webpage.

Category: Co-authors

Load More

Adding content and resources to my ePoster/stack

Currently Learning Toolbox does not support live collaborative editing of an ePoster by multiple authors. Instead each ePoster has one person who takes on the editing author role.
If you have been sent an invite link to create an ePoster for a conference, then the first person who follows that link will be given the editing role.
 
The person who takes on the editing author role will be able to add their co-authors’ names to the ePoster by adding their names in the Stack Poster Details Tab and can also specify who will appear in the summary view as the Named Author. However, their co-authors will not be able to edit the ePoster.
 
The editing author can also share the link to the ePoster with their co-authors (How do I share an ePoster from my computer) so that their co-authors can view the developing ePoster and email them with any feedback or suggestions. If they do this then they should make sure they change the ePoster permissions from Private to Hidden and Anonymous Access (How do I set access permissions) before sending the link to their co-authors.
 
If your co-author has followed the invite link after you then they will get a message explaining that the link has already been used. If you would like to switch the editing role to them then just contact support (the team who are supporting your use of Learning Toolbox) and they will be able to do this for you.
 
Category: Co-authors

The Named Author space (1) allows you to decide which author’s name you want to appear on the summary view of the stack/ePoster in the showcase.

The default is that the editing author’s name will appear here, but you can change this to a different name. If you then save (2) and close the editor (3) then you will be able to see where the Named Author appears in your stack/ePoster’s summary view (4).

There is a character limit of 25 for the Named Author to ensure that it can be displayed within the summary view. This means you will not be able to list all the co-authors of a stack/ePoster within the Named Author space. Although you can use the academic convention of et al. to indicate within the Named Author space that there are more authors (e.g. I could edit the Named Author to be “T. Treasure-Jones et al.”)

You can also add all your co-authors details within the stack/ePoster itself. Many authors add a Text Tile listing all the co-authors. Another possible approach is to add a new Screen and on that new screen to add a Tile for each author which links to their professional webpage.

Category: Co-authors

Load More

Changing the layout and appearance of a tile

Currently Learning Toolbox does not support live collaborative editing of an ePoster by multiple authors. Instead each ePoster has one person who takes on the editing author role.
If you have been sent an invite link to create an ePoster for a conference, then the first person who follows that link will be given the editing role.
 
The person who takes on the editing author role will be able to add their co-authors’ names to the ePoster by adding their names in the Stack Poster Details Tab and can also specify who will appear in the summary view as the Named Author. However, their co-authors will not be able to edit the ePoster.
 
The editing author can also share the link to the ePoster with their co-authors (How do I share an ePoster from my computer) so that their co-authors can view the developing ePoster and email them with any feedback or suggestions. If they do this then they should make sure they change the ePoster permissions from Private to Hidden and Anonymous Access (How do I set access permissions) before sending the link to their co-authors.
 
If your co-author has followed the invite link after you then they will get a message explaining that the link has already been used. If you would like to switch the editing role to them then just contact support (the team who are supporting your use of Learning Toolbox) and they will be able to do this for you.
 
Category: Co-authors

The Named Author space (1) allows you to decide which author’s name you want to appear on the summary view of the stack/ePoster in the showcase.

The default is that the editing author’s name will appear here, but you can change this to a different name. If you then save (2) and close the editor (3) then you will be able to see where the Named Author appears in your stack/ePoster’s summary view (4).

There is a character limit of 25 for the Named Author to ensure that it can be displayed within the summary view. This means you will not be able to list all the co-authors of a stack/ePoster within the Named Author space. Although you can use the academic convention of et al. to indicate within the Named Author space that there are more authors (e.g. I could edit the Named Author to be “T. Treasure-Jones et al.”)

You can also add all your co-authors details within the stack/ePoster itself. Many authors add a Text Tile listing all the co-authors. Another possible approach is to add a new Screen and on that new screen to add a Tile for each author which links to their professional webpage.

Category: Co-authors

Load More

Adding an extra screen/layer to my ePoster/stack

Currently Learning Toolbox does not support live collaborative editing of an ePoster by multiple authors. Instead each ePoster has one person who takes on the editing author role.
If you have been sent an invite link to create an ePoster for a conference, then the first person who follows that link will be given the editing role.
 
The person who takes on the editing author role will be able to add their co-authors’ names to the ePoster by adding their names in the Stack Poster Details Tab and can also specify who will appear in the summary view as the Named Author. However, their co-authors will not be able to edit the ePoster.
 
The editing author can also share the link to the ePoster with their co-authors (How do I share an ePoster from my computer) so that their co-authors can view the developing ePoster and email them with any feedback or suggestions. If they do this then they should make sure they change the ePoster permissions from Private to Hidden and Anonymous Access (How do I set access permissions) before sending the link to their co-authors.
 
If your co-author has followed the invite link after you then they will get a message explaining that the link has already been used. If you would like to switch the editing role to them then just contact support (the team who are supporting your use of Learning Toolbox) and they will be able to do this for you.
 
Category: Co-authors

The Named Author space (1) allows you to decide which author’s name you want to appear on the summary view of the stack/ePoster in the showcase.

The default is that the editing author’s name will appear here, but you can change this to a different name. If you then save (2) and close the editor (3) then you will be able to see where the Named Author appears in your stack/ePoster’s summary view (4).

There is a character limit of 25 for the Named Author to ensure that it can be displayed within the summary view. This means you will not be able to list all the co-authors of a stack/ePoster within the Named Author space. Although you can use the academic convention of et al. to indicate within the Named Author space that there are more authors (e.g. I could edit the Named Author to be “T. Treasure-Jones et al.”)

You can also add all your co-authors details within the stack/ePoster itself. Many authors add a Text Tile listing all the co-authors. Another possible approach is to add a new Screen and on that new screen to add a Tile for each author which links to their professional webpage.

Category: Co-authors

Load More

Viewing and testing my ePoster/stack

Currently Learning Toolbox does not support live collaborative editing of an ePoster by multiple authors. Instead each ePoster has one person who takes on the editing author role.
If you have been sent an invite link to create an ePoster for a conference, then the first person who follows that link will be given the editing role.
 
The person who takes on the editing author role will be able to add their co-authors’ names to the ePoster by adding their names in the Stack Poster Details Tab and can also specify who will appear in the summary view as the Named Author. However, their co-authors will not be able to edit the ePoster.
 
The editing author can also share the link to the ePoster with their co-authors (How do I share an ePoster from my computer) so that their co-authors can view the developing ePoster and email them with any feedback or suggestions. If they do this then they should make sure they change the ePoster permissions from Private to Hidden and Anonymous Access (How do I set access permissions) before sending the link to their co-authors.
 
If your co-author has followed the invite link after you then they will get a message explaining that the link has already been used. If you would like to switch the editing role to them then just contact support (the team who are supporting your use of Learning Toolbox) and they will be able to do this for you.
 
Category: Co-authors

The Named Author space (1) allows you to decide which author’s name you want to appear on the summary view of the stack/ePoster in the showcase.

The default is that the editing author’s name will appear here, but you can change this to a different name. If you then save (2) and close the editor (3) then you will be able to see where the Named Author appears in your stack/ePoster’s summary view (4).

There is a character limit of 25 for the Named Author to ensure that it can be displayed within the summary view. This means you will not be able to list all the co-authors of a stack/ePoster within the Named Author space. Although you can use the academic convention of et al. to indicate within the Named Author space that there are more authors (e.g. I could edit the Named Author to be “T. Treasure-Jones et al.”)

You can also add all your co-authors details within the stack/ePoster itself. Many authors add a Text Tile listing all the co-authors. Another possible approach is to add a new Screen and on that new screen to add a Tile for each author which links to their professional webpage.

Category: Co-authors

Load More

Your ePoster on the showcase website

Currently Learning Toolbox does not support live collaborative editing of an ePoster by multiple authors. Instead each ePoster has one person who takes on the editing author role.
If you have been sent an invite link to create an ePoster for a conference, then the first person who follows that link will be given the editing role.
 
The person who takes on the editing author role will be able to add their co-authors’ names to the ePoster by adding their names in the Stack Poster Details Tab and can also specify who will appear in the summary view as the Named Author. However, their co-authors will not be able to edit the ePoster.
 
The editing author can also share the link to the ePoster with their co-authors (How do I share an ePoster from my computer) so that their co-authors can view the developing ePoster and email them with any feedback or suggestions. If they do this then they should make sure they change the ePoster permissions from Private to Hidden and Anonymous Access (How do I set access permissions) before sending the link to their co-authors.
 
If your co-author has followed the invite link after you then they will get a message explaining that the link has already been used. If you would like to switch the editing role to them then just contact support (the team who are supporting your use of Learning Toolbox) and they will be able to do this for you.
 
Category: Co-authors

The Named Author space (1) allows you to decide which author’s name you want to appear on the summary view of the stack/ePoster in the showcase.

The default is that the editing author’s name will appear here, but you can change this to a different name. If you then save (2) and close the editor (3) then you will be able to see where the Named Author appears in your stack/ePoster’s summary view (4).

There is a character limit of 25 for the Named Author to ensure that it can be displayed within the summary view. This means you will not be able to list all the co-authors of a stack/ePoster within the Named Author space. Although you can use the academic convention of et al. to indicate within the Named Author space that there are more authors (e.g. I could edit the Named Author to be “T. Treasure-Jones et al.”)

You can also add all your co-authors details within the stack/ePoster itself. Many authors add a Text Tile listing all the co-authors. Another possible approach is to add a new Screen and on that new screen to add a Tile for each author which links to their professional webpage.

Category: Co-authors

Load More

Marking your ePoster as ready to publish to the showcase

Currently Learning Toolbox does not support live collaborative editing of an ePoster by multiple authors. Instead each ePoster has one person who takes on the editing author role.
If you have been sent an invite link to create an ePoster for a conference, then the first person who follows that link will be given the editing role.
 
The person who takes on the editing author role will be able to add their co-authors’ names to the ePoster by adding their names in the Stack Poster Details Tab and can also specify who will appear in the summary view as the Named Author. However, their co-authors will not be able to edit the ePoster.
 
The editing author can also share the link to the ePoster with their co-authors (How do I share an ePoster from my computer) so that their co-authors can view the developing ePoster and email them with any feedback or suggestions. If they do this then they should make sure they change the ePoster permissions from Private to Hidden and Anonymous Access (How do I set access permissions) before sending the link to their co-authors.
 
If your co-author has followed the invite link after you then they will get a message explaining that the link has already been used. If you would like to switch the editing role to them then just contact support (the team who are supporting your use of Learning Toolbox) and they will be able to do this for you.
 
Category: Co-authors

The Named Author space (1) allows you to decide which author’s name you want to appear on the summary view of the stack/ePoster in the showcase.

The default is that the editing author’s name will appear here, but you can change this to a different name. If you then save (2) and close the editor (3) then you will be able to see where the Named Author appears in your stack/ePoster’s summary view (4).

There is a character limit of 25 for the Named Author to ensure that it can be displayed within the summary view. This means you will not be able to list all the co-authors of a stack/ePoster within the Named Author space. Although you can use the academic convention of et al. to indicate within the Named Author space that there are more authors (e.g. I could edit the Named Author to be “T. Treasure-Jones et al.”)

You can also add all your co-authors details within the stack/ePoster itself. Many authors add a Text Tile listing all the co-authors. Another possible approach is to add a new Screen and on that new screen to add a Tile for each author which links to their professional webpage.

Category: Co-authors

Load More

Creating the mini-poster

An option usually used by onsite conferences to promote your ePoster onsite.

Currently Learning Toolbox does not support live collaborative editing of an ePoster by multiple authors. Instead each ePoster has one person who takes on the editing author role.
If you have been sent an invite link to create an ePoster for a conference, then the first person who follows that link will be given the editing role.
 
The person who takes on the editing author role will be able to add their co-authors’ names to the ePoster by adding their names in the Stack Poster Details Tab and can also specify who will appear in the summary view as the Named Author. However, their co-authors will not be able to edit the ePoster.
 
The editing author can also share the link to the ePoster with their co-authors (How do I share an ePoster from my computer) so that their co-authors can view the developing ePoster and email them with any feedback or suggestions. If they do this then they should make sure they change the ePoster permissions from Private to Hidden and Anonymous Access (How do I set access permissions) before sending the link to their co-authors.
 
If your co-author has followed the invite link after you then they will get a message explaining that the link has already been used. If you would like to switch the editing role to them then just contact support (the team who are supporting your use of Learning Toolbox) and they will be able to do this for you.
 
Category: Co-authors

The Named Author space (1) allows you to decide which author’s name you want to appear on the summary view of the stack/ePoster in the showcase.

The default is that the editing author’s name will appear here, but you can change this to a different name. If you then save (2) and close the editor (3) then you will be able to see where the Named Author appears in your stack/ePoster’s summary view (4).

There is a character limit of 25 for the Named Author to ensure that it can be displayed within the summary view. This means you will not be able to list all the co-authors of a stack/ePoster within the Named Author space. Although you can use the academic convention of et al. to indicate within the Named Author space that there are more authors (e.g. I could edit the Named Author to be “T. Treasure-Jones et al.”)

You can also add all your co-authors details within the stack/ePoster itself. Many authors add a Text Tile listing all the co-authors. Another possible approach is to add a new Screen and on that new screen to add a Tile for each author which links to their professional webpage.

Category: Co-authors

Load More

Presenting my ePoster

Currently Learning Toolbox does not support live collaborative editing of an ePoster by multiple authors. Instead each ePoster has one person who takes on the editing author role.
If you have been sent an invite link to create an ePoster for a conference, then the first person who follows that link will be given the editing role.
 
The person who takes on the editing author role will be able to add their co-authors’ names to the ePoster by adding their names in the Stack Poster Details Tab and can also specify who will appear in the summary view as the Named Author. However, their co-authors will not be able to edit the ePoster.
 
The editing author can also share the link to the ePoster with their co-authors (How do I share an ePoster from my computer) so that their co-authors can view the developing ePoster and email them with any feedback or suggestions. If they do this then they should make sure they change the ePoster permissions from Private to Hidden and Anonymous Access (How do I set access permissions) before sending the link to their co-authors.
 
If your co-author has followed the invite link after you then they will get a message explaining that the link has already been used. If you would like to switch the editing role to them then just contact support (the team who are supporting your use of Learning Toolbox) and they will be able to do this for you.
 
Category: Co-authors

The Named Author space (1) allows you to decide which author’s name you want to appear on the summary view of the stack/ePoster in the showcase.

The default is that the editing author’s name will appear here, but you can change this to a different name. If you then save (2) and close the editor (3) then you will be able to see where the Named Author appears in your stack/ePoster’s summary view (4).

There is a character limit of 25 for the Named Author to ensure that it can be displayed within the summary view. This means you will not be able to list all the co-authors of a stack/ePoster within the Named Author space. Although you can use the academic convention of et al. to indicate within the Named Author space that there are more authors (e.g. I could edit the Named Author to be “T. Treasure-Jones et al.”)

You can also add all your co-authors details within the stack/ePoster itself. Many authors add a Text Tile listing all the co-authors. Another possible approach is to add a new Screen and on that new screen to add a Tile for each author which links to their professional webpage.

Category: Co-authors

Load More

Exploring and sharing published ePosters/stacks

Currently Learning Toolbox does not support live collaborative editing of an ePoster by multiple authors. Instead each ePoster has one person who takes on the editing author role.
If you have been sent an invite link to create an ePoster for a conference, then the first person who follows that link will be given the editing role.
 
The person who takes on the editing author role will be able to add their co-authors’ names to the ePoster by adding their names in the Stack Poster Details Tab and can also specify who will appear in the summary view as the Named Author. However, their co-authors will not be able to edit the ePoster.
 
The editing author can also share the link to the ePoster with their co-authors (How do I share an ePoster from my computer) so that their co-authors can view the developing ePoster and email them with any feedback or suggestions. If they do this then they should make sure they change the ePoster permissions from Private to Hidden and Anonymous Access (How do I set access permissions) before sending the link to their co-authors.
 
If your co-author has followed the invite link after you then they will get a message explaining that the link has already been used. If you would like to switch the editing role to them then just contact support (the team who are supporting your use of Learning Toolbox) and they will be able to do this for you.
 
Category: Co-authors

The Named Author space (1) allows you to decide which author’s name you want to appear on the summary view of the stack/ePoster in the showcase.

The default is that the editing author’s name will appear here, but you can change this to a different name. If you then save (2) and close the editor (3) then you will be able to see where the Named Author appears in your stack/ePoster’s summary view (4).

There is a character limit of 25 for the Named Author to ensure that it can be displayed within the summary view. This means you will not be able to list all the co-authors of a stack/ePoster within the Named Author space. Although you can use the academic convention of et al. to indicate within the Named Author space that there are more authors (e.g. I could edit the Named Author to be “T. Treasure-Jones et al.”)

You can also add all your co-authors details within the stack/ePoster itself. Many authors add a Text Tile listing all the co-authors. Another possible approach is to add a new Screen and on that new screen to add a Tile for each author which links to their professional webpage.

Category: Co-authors

Load More

Engaging with the viewers of your ePosters/stacks

Currently Learning Toolbox does not support live collaborative editing of an ePoster by multiple authors. Instead each ePoster has one person who takes on the editing author role.
If you have been sent an invite link to create an ePoster for a conference, then the first person who follows that link will be given the editing role.
 
The person who takes on the editing author role will be able to add their co-authors’ names to the ePoster by adding their names in the Stack Poster Details Tab and can also specify who will appear in the summary view as the Named Author. However, their co-authors will not be able to edit the ePoster.
 
The editing author can also share the link to the ePoster with their co-authors (How do I share an ePoster from my computer) so that their co-authors can view the developing ePoster and email them with any feedback or suggestions. If they do this then they should make sure they change the ePoster permissions from Private to Hidden and Anonymous Access (How do I set access permissions) before sending the link to their co-authors.
 
If your co-author has followed the invite link after you then they will get a message explaining that the link has already been used. If you would like to switch the editing role to them then just contact support (the team who are supporting your use of Learning Toolbox) and they will be able to do this for you.
 
Category: Co-authors

The Named Author space (1) allows you to decide which author’s name you want to appear on the summary view of the stack/ePoster in the showcase.

The default is that the editing author’s name will appear here, but you can change this to a different name. If you then save (2) and close the editor (3) then you will be able to see where the Named Author appears in your stack/ePoster’s summary view (4).

There is a character limit of 25 for the Named Author to ensure that it can be displayed within the summary view. This means you will not be able to list all the co-authors of a stack/ePoster within the Named Author space. Although you can use the academic convention of et al. to indicate within the Named Author space that there are more authors (e.g. I could edit the Named Author to be “T. Treasure-Jones et al.”)

You can also add all your co-authors details within the stack/ePoster itself. Many authors add a Text Tile listing all the co-authors. Another possible approach is to add a new Screen and on that new screen to add a Tile for each author which links to their professional webpage.

Category: Co-authors

Load More