ePosters Support Page for RAW TESTING

Key Information

AMEE 2021 Conference

If you are looking for general information about the AMEE 2021 Conference (rather than ePoster specific information) then please look at the AMEE 2021 Conference Page as it contains the full information about the conference.

AMEE 2021 – ePosters and Learning Toolbox

Load More

Load More

Load More

Load More

Webinars (26th May and 9th August)

Load More

Load More

General overview

You will see this view (offering the option to mark your ePoster as ready) when you have closed the stack/ePoster editor.

You need to click on both buttons to indicate that it is ready to print and ready to publish. In fact there will be no printing done for online only conferences, but you still need to click the ready for printing button. In future this button will be removed for online only conferences.

We strongly recommend that you preview your stack/ePoster and check that it works as you expect, before you mark it as ready to publish.

Marking your stack/ePoster will let the administrators know that your stack is ready. It will not be published to the showcase immediately, as the administrators will take that action and they may have many stacks/ePosters to review. However, once it has been published then you will see a message onscreen indicating that this has been done (as shown in the image below).

Confirmation that your stack/ePoster has been published to the showcase

If you do not see the buttons that allow you to mark you ePoster as ready then this will be because you are creating a stack/ePoster that is not linked to a conference/event invite with a showcase. In this case you can instead make your ePoster public yourself by changing its access permissions.

Load More

Creating an ePoster/Stack

You will see this view (offering the option to mark your ePoster as ready) when you have closed the stack/ePoster editor.

You need to click on both buttons to indicate that it is ready to print and ready to publish. In fact there will be no printing done for online only conferences, but you still need to click the ready for printing button. In future this button will be removed for online only conferences.

We strongly recommend that you preview your stack/ePoster and check that it works as you expect, before you mark it as ready to publish.

Marking your stack/ePoster will let the administrators know that your stack is ready. It will not be published to the showcase immediately, as the administrators will take that action and they may have many stacks/ePosters to review. However, once it has been published then you will see a message onscreen indicating that this has been done (as shown in the image below).

Confirmation that your stack/ePoster has been published to the showcase

If you do not see the buttons that allow you to mark you ePoster as ready then this will be because you are creating a stack/ePoster that is not linked to a conference/event invite with a showcase. In this case you can instead make your ePoster public yourself by changing its access permissions.

Load More

Answers to Frequently Asked Questions (FAQs)

Co-authors

You will see this view (offering the option to mark your ePoster as ready) when you have closed the stack/ePoster editor.

You need to click on both buttons to indicate that it is ready to print and ready to publish. In fact there will be no printing done for online only conferences, but you still need to click the ready for printing button. In future this button will be removed for online only conferences.

We strongly recommend that you preview your stack/ePoster and check that it works as you expect, before you mark it as ready to publish.

Marking your stack/ePoster will let the administrators know that your stack is ready. It will not be published to the showcase immediately, as the administrators will take that action and they may have many stacks/ePosters to review. However, once it has been published then you will see a message onscreen indicating that this has been done (as shown in the image below).

Confirmation that your stack/ePoster has been published to the showcase

If you do not see the buttons that allow you to mark you ePoster as ready then this will be because you are creating a stack/ePoster that is not linked to a conference/event invite with a showcase. In this case you can instead make your ePoster public yourself by changing its access permissions.

Load More

Adding content and resources to my ePoster/stack

You will see this view (offering the option to mark your ePoster as ready) when you have closed the stack/ePoster editor.

You need to click on both buttons to indicate that it is ready to print and ready to publish. In fact there will be no printing done for online only conferences, but you still need to click the ready for printing button. In future this button will be removed for online only conferences.

We strongly recommend that you preview your stack/ePoster and check that it works as you expect, before you mark it as ready to publish.

Marking your stack/ePoster will let the administrators know that your stack is ready. It will not be published to the showcase immediately, as the administrators will take that action and they may have many stacks/ePosters to review. However, once it has been published then you will see a message onscreen indicating that this has been done (as shown in the image below).

Confirmation that your stack/ePoster has been published to the showcase

If you do not see the buttons that allow you to mark you ePoster as ready then this will be because you are creating a stack/ePoster that is not linked to a conference/event invite with a showcase. In this case you can instead make your ePoster public yourself by changing its access permissions.

Load More

Changing the layout and appearance of a tile

You will see this view (offering the option to mark your ePoster as ready) when you have closed the stack/ePoster editor.

You need to click on both buttons to indicate that it is ready to print and ready to publish. In fact there will be no printing done for online only conferences, but you still need to click the ready for printing button. In future this button will be removed for online only conferences.

We strongly recommend that you preview your stack/ePoster and check that it works as you expect, before you mark it as ready to publish.

Marking your stack/ePoster will let the administrators know that your stack is ready. It will not be published to the showcase immediately, as the administrators will take that action and they may have many stacks/ePosters to review. However, once it has been published then you will see a message onscreen indicating that this has been done (as shown in the image below).

Confirmation that your stack/ePoster has been published to the showcase

If you do not see the buttons that allow you to mark you ePoster as ready then this will be because you are creating a stack/ePoster that is not linked to a conference/event invite with a showcase. In this case you can instead make your ePoster public yourself by changing its access permissions.

Load More

Adding an extra screen/layer to my ePoster/stack

You will see this view (offering the option to mark your ePoster as ready) when you have closed the stack/ePoster editor.

You need to click on both buttons to indicate that it is ready to print and ready to publish. In fact there will be no printing done for online only conferences, but you still need to click the ready for printing button. In future this button will be removed for online only conferences.

We strongly recommend that you preview your stack/ePoster and check that it works as you expect, before you mark it as ready to publish.

Marking your stack/ePoster will let the administrators know that your stack is ready. It will not be published to the showcase immediately, as the administrators will take that action and they may have many stacks/ePosters to review. However, once it has been published then you will see a message onscreen indicating that this has been done (as shown in the image below).

Confirmation that your stack/ePoster has been published to the showcase

If you do not see the buttons that allow you to mark you ePoster as ready then this will be because you are creating a stack/ePoster that is not linked to a conference/event invite with a showcase. In this case you can instead make your ePoster public yourself by changing its access permissions.

Load More

Viewing and testing my ePoster/stack

You will see this view (offering the option to mark your ePoster as ready) when you have closed the stack/ePoster editor.

You need to click on both buttons to indicate that it is ready to print and ready to publish. In fact there will be no printing done for online only conferences, but you still need to click the ready for printing button. In future this button will be removed for online only conferences.

We strongly recommend that you preview your stack/ePoster and check that it works as you expect, before you mark it as ready to publish.

Marking your stack/ePoster will let the administrators know that your stack is ready. It will not be published to the showcase immediately, as the administrators will take that action and they may have many stacks/ePosters to review. However, once it has been published then you will see a message onscreen indicating that this has been done (as shown in the image below).

Confirmation that your stack/ePoster has been published to the showcase

If you do not see the buttons that allow you to mark you ePoster as ready then this will be because you are creating a stack/ePoster that is not linked to a conference/event invite with a showcase. In this case you can instead make your ePoster public yourself by changing its access permissions.

Load More

Your ePoster on the showcase website

You will see this view (offering the option to mark your ePoster as ready) when you have closed the stack/ePoster editor.

You need to click on both buttons to indicate that it is ready to print and ready to publish. In fact there will be no printing done for online only conferences, but you still need to click the ready for printing button. In future this button will be removed for online only conferences.

We strongly recommend that you preview your stack/ePoster and check that it works as you expect, before you mark it as ready to publish.

Marking your stack/ePoster will let the administrators know that your stack is ready. It will not be published to the showcase immediately, as the administrators will take that action and they may have many stacks/ePosters to review. However, once it has been published then you will see a message onscreen indicating that this has been done (as shown in the image below).

Confirmation that your stack/ePoster has been published to the showcase

If you do not see the buttons that allow you to mark you ePoster as ready then this will be because you are creating a stack/ePoster that is not linked to a conference/event invite with a showcase. In this case you can instead make your ePoster public yourself by changing its access permissions.

Load More

Marking your ePoster as ready to publish to the showcase

You will see this view (offering the option to mark your ePoster as ready) when you have closed the stack/ePoster editor.

You need to click on both buttons to indicate that it is ready to print and ready to publish. In fact there will be no printing done for online only conferences, but you still need to click the ready for printing button. In future this button will be removed for online only conferences.

We strongly recommend that you preview your stack/ePoster and check that it works as you expect, before you mark it as ready to publish.

Marking your stack/ePoster will let the administrators know that your stack is ready. It will not be published to the showcase immediately, as the administrators will take that action and they may have many stacks/ePosters to review. However, once it has been published then you will see a message onscreen indicating that this has been done (as shown in the image below).

Confirmation that your stack/ePoster has been published to the showcase

If you do not see the buttons that allow you to mark you ePoster as ready then this will be because you are creating a stack/ePoster that is not linked to a conference/event invite with a showcase. In this case you can instead make your ePoster public yourself by changing its access permissions.

Load More

Creating the mini-poster

An option usually used by onsite conferences to promote your ePoster onsite.

You will see this view (offering the option to mark your ePoster as ready) when you have closed the stack/ePoster editor.

You need to click on both buttons to indicate that it is ready to print and ready to publish. In fact there will be no printing done for online only conferences, but you still need to click the ready for printing button. In future this button will be removed for online only conferences.

We strongly recommend that you preview your stack/ePoster and check that it works as you expect, before you mark it as ready to publish.

Marking your stack/ePoster will let the administrators know that your stack is ready. It will not be published to the showcase immediately, as the administrators will take that action and they may have many stacks/ePosters to review. However, once it has been published then you will see a message onscreen indicating that this has been done (as shown in the image below).

Confirmation that your stack/ePoster has been published to the showcase

If you do not see the buttons that allow you to mark you ePoster as ready then this will be because you are creating a stack/ePoster that is not linked to a conference/event invite with a showcase. In this case you can instead make your ePoster public yourself by changing its access permissions.

Load More

Presenting my ePoster

You will see this view (offering the option to mark your ePoster as ready) when you have closed the stack/ePoster editor.

You need to click on both buttons to indicate that it is ready to print and ready to publish. In fact there will be no printing done for online only conferences, but you still need to click the ready for printing button. In future this button will be removed for online only conferences.

We strongly recommend that you preview your stack/ePoster and check that it works as you expect, before you mark it as ready to publish.

Marking your stack/ePoster will let the administrators know that your stack is ready. It will not be published to the showcase immediately, as the administrators will take that action and they may have many stacks/ePosters to review. However, once it has been published then you will see a message onscreen indicating that this has been done (as shown in the image below).

Confirmation that your stack/ePoster has been published to the showcase

If you do not see the buttons that allow you to mark you ePoster as ready then this will be because you are creating a stack/ePoster that is not linked to a conference/event invite with a showcase. In this case you can instead make your ePoster public yourself by changing its access permissions.

Load More

Exploring and sharing published ePosters/stacks

You will see this view (offering the option to mark your ePoster as ready) when you have closed the stack/ePoster editor.

You need to click on both buttons to indicate that it is ready to print and ready to publish. In fact there will be no printing done for online only conferences, but you still need to click the ready for printing button. In future this button will be removed for online only conferences.

We strongly recommend that you preview your stack/ePoster and check that it works as you expect, before you mark it as ready to publish.

Marking your stack/ePoster will let the administrators know that your stack is ready. It will not be published to the showcase immediately, as the administrators will take that action and they may have many stacks/ePosters to review. However, once it has been published then you will see a message onscreen indicating that this has been done (as shown in the image below).

Confirmation that your stack/ePoster has been published to the showcase

If you do not see the buttons that allow you to mark you ePoster as ready then this will be because you are creating a stack/ePoster that is not linked to a conference/event invite with a showcase. In this case you can instead make your ePoster public yourself by changing its access permissions.

Load More

Engaging with the viewers of your ePosters/stacks

You will see this view (offering the option to mark your ePoster as ready) when you have closed the stack/ePoster editor.

You need to click on both buttons to indicate that it is ready to print and ready to publish. In fact there will be no printing done for online only conferences, but you still need to click the ready for printing button. In future this button will be removed for online only conferences.

We strongly recommend that you preview your stack/ePoster and check that it works as you expect, before you mark it as ready to publish.

Marking your stack/ePoster will let the administrators know that your stack is ready. It will not be published to the showcase immediately, as the administrators will take that action and they may have many stacks/ePosters to review. However, once it has been published then you will see a message onscreen indicating that this has been done (as shown in the image below).

Confirmation that your stack/ePoster has been published to the showcase

If you do not see the buttons that allow you to mark you ePoster as ready then this will be because you are creating a stack/ePoster that is not linked to a conference/event invite with a showcase. In this case you can instead make your ePoster public yourself by changing its access permissions.

Load More